hi there,
i have a problem, i have a MSI TV @nywhere card in my computer and i
istall driver and software to watch tv on my computer but its not
working i try different operating systems,

I just bought an MSI k8t800 Neo FSR refurb MB.
Anyone know where I can get a I/O Back plate or I/O panel as MSI calls it.

I flashed my k8n neo2 platinum from the 1.4 bios to 1.5. When I
rebooted my ps2 keyboard wouldnt work. No way to login to win2k pro.
I tried a usb keyboard but no luck. The system doesn't seem to
recognize it. I don't know whether it's because it hasn't seen it

I just received a K8T with the backplate and retention mechanism already
installed.  I'm wondering whether this is a used board.  Can you (all) tell
me whether it has been your experience to receive K8T Neo2's with the
retention mechanism installed (contrary to the pictures in ...

I have some problems with a new PC,  when I try to copy a DVD movie using
DVDShrink it restarts during the burn process, the CPU load is only some 16%
when burning, by deep analyse is nearly 100%.
My setup is:

I just put together a system with MSI K7N2GM-V (MS-7119 ver 1.0) mobo
(from Newegg refurbished which means no installation CD) and after
loading some of the utility programs from MSI, (PC Alert 4, Fuzzy
Logic) I now have [Other Devices] recognized by the XP operating system

Just ordered the above combo and I hope they will work OK with the shipping
BIOS, V. 1.1 (I think).
Anybody tried this, and will I be better off getting a Winchester instead of
the Venice?

I`m considering buying either of these mb`s for a budget gaming system
upgrade and would like some recommendations from existing users. I`ve
checked out some of the online reviews, most of which are now months
old. Is the nforce or the via chipset generally regarded as the best

I have a problem with all USB removable storage devices. They are all
recognized and seems to do well, but after a while (from a couple of seconds
up to several minutes) they dissapear. This last just for a moment and the
devices are found again. The same story goes on.

Does the subject motherboard support 939 pin CPU's that run at 1600 as
opposed to the stated 2000 MT/s shown on:
http://www.msicomputer.com/product/p_spec.asp?model=K8N_Neo2_Platinum&class=mb
?

My computer won't boot.
The motherboard is an ms 6567
I've tried reseating the ram, cpu and clearing the cmos.
When i press the power button the leds on the front panel light

I have a Gateway computer about 4 years old with an MSI mainboard MS-6330
Oxnard version 2.1, AMD Athlon 1GHz processor and PC133 RAM.  A recent crash
damaged the bios and I have bought a programmed replacement chip but have
just discovered that the bios chip is soldered into the ...

I have just installed an XP3000+ CPU into my KT4V-L mainboard, but cannot
get the system to recognise the correct CPU.
FSB has been set in the BIOS to 166MHz and all other frequency/voltage
settings are on auto, but the system will only recognise the CPU as XP2700+.

te reason is that im on a limited budget and that's the most expensive
1 i can afford. so pleas if u use this mb then let me know how it is.

Guys
        Is there a way that my MSI 7030 board can wake up when called from a modem ?
Tia
Elvey