Where can I see in Bios or with any special programs, if DDR-RAM runs
with CMD 1T or 2T with the K7n2g?
Thanks for help
Ralph

Where do you get the cable for adding a serial port to this motherboard?
Is it propriatary?

Will PC2700 work ok on this board?
Thanks
Gary

WANT TO BUY MSI K8N NEO4 PLATINUM WITH ONE MSI NX6800GT 256G PCI-E OR GO
WITH MSI K8N NEO4 PLATINUM/SLI WITH TWO NX6600GT 128G PCI-E. USING AMD
ATHLON 64-3800+ AND A WD 74G SATA 10K HDD AND 1 G (2 X 512 ) DDR DUAL
CHANNEL PC3200 OR WILL 2 G (2 X 1G) WORK BETTER OR IS IT OVER KILL.

Just installed XP Home SP2 on a Neo4 Platinum Nforce 4, I've having no luck
in getting the Nforce 4 drivers to work. I installed the standalone package
from Nvidia site but still have errors on audio/ethernet & RAID in device
manager.

Oh btw... msi tech support suggested that this is an issue with the
motherboard, but it is completely new... im the first owner of it and
i dont know whats goin on :/

Mine is dying. Network adaptor died. Floppy doesn't work. DVD ROM is
flaky. What's good to use with XP2000 processor?

My daughter had a soyo board replaced with the subject MSI board.  It was
installed at a shop.  It runs with no problems except she says that
occasionally the machine emits an audible alarm similar to an auto alarm.  I
have read through the K7N2 Delta user's guide but have not seen ...

I just bought this combo from Newegg.  When I fired it up, it did not
post and I smelled something burning.  I powered it off as quickly as
possible.  I fear that the CPU and/or motherboard are fried.  This
combo should work, shouldn't it?  Did I get a faulty board or CPU?

Hey folks,
First message here...I have a new K8T Neo-FSR 6702 board and everything
is wonderful...except my RAM.
I am showing a speed of 333 MHz and I can't figure a way to up that.

I purchased this board used. Worked great except my USB 2.0 card was giving
me trouble.
Being blonde (DUH) I thought I would upgrade the bios to see if this helped.
( Bigger DUH) when I didn't check to see which bios was installed before I

  I have upgraded my kid's PC with a KM2M motherboard, She has an Optical
Mouse and now the mouse LED is on even when the PC is shut down. She does
not need a red night light  in her room but we don't want to have to remove
the power cord every night.

mb does not boot. nothing in screen - no bios . just led GRR- and
nothing else !
before this pb, i try to put a 1.44 drive on A: and enable it on bios.
thanks in advance.

I have a PC built from  an 875p neo mb.  When I put anything in the pci
slots, windows XP will not detect them correcty.  A firewire card (which I
know works) is detected as 'system interrupt controller' and soundcards come
up as 'vga device'  Any ideas why?

K8N Neo2 with two Maxtor 6B250S0 250GB SATA drives on SATA 1 and 2
XP Prof SP2
Why do these drives show up in "safely remove hardware" in the taskbar?
Beemer