I have a problem with the MSI KT3 ultra aru.
Xp, bios, via drivers up to date.
When i connect a scanner with any of the usb ports, it
is detected well thru Xp, can scan one picture and than

I have a Neo2 865PE (6728) and am trying to hook up a 160GB WD Sata
drive. Have been playing for days trying to get it to work. I can't
seem to get the IAA to install. When I go to the intel site and
install the application accelerator it says my chipset is not

I just changed my cooling system on a P4 2.6C (standard to sp94) on a
MSI6728(865PENeoFIS2R) but after this operation I'm no more able to boot
really
I get a screen informing that no bios is installed but for the following

After installing Norton Internet Security, a mate's computer ground to a
halt and he passed it on to me for repair. It's a MSI K7T266 Pro2-U that's
never known the meaning of driver or windows update...
Things were going well enough after removing Norton's, updating drivers,

Is there anyone here that uses the K8N Neo Platinum mobo with Value
Select ram? I've had nothing but problems since I bought an upgrade
kit from Komplett which contained the following:
MSI K8N Neo Platinum motherbaord

When I run Live Monitor I get invalid URL. Always worked in the past.
Installed SP/2 but don't know if that has anything to do with it.
Anyone else having the same problem?
Thanks,

I just brought and setup an AMD Athlon 64 3400+ processer along with a
MSI K8T Neo.. however when i power up the system runs fine for about
20 seconds or so then it switches off and the Power L.E.D starts
flashing, i've tried disconnecting the power cable and trying again,

Before purchasing a Sony TFT LCD monitor I'd read lots of opinions that
playing games at non native resolutions would look terrible.  I've found
the opposite to be the case, on my old 19" Dell CRT playing games at
800x600 was completely unacceptable, but since I got this monitor ...

I've got an Athlon XP 2000+, with the FSB Clock set to 133 in the BIOS, and
the clock for my DDR400 mem set to AUTO. The PATA HD is connected on the
same channel as my CDRW with a SATA 133 cable. The motherboard came with
Gigabit Ethernet, FireWire and SATA. Th power-supply is 300W. ...

i have a K8N- Neo2 mobo, XP3500, every time i power on my pc, windows cannot
find the usb ports. i have to uninstall them in device manager, then reboot.
windows then detects and installs the drivers for them. This is not what i
expect to have to do every power up! Any help or ...

What's the fastest cpu and ram for an MS-6714 with PGA478B socket?
I know a P4 3.06MHz with 533FSB will work fine but can I put in a
P4 3.2 800FSB and have it work fine too?  How fast do the ram sticks
have to be rated for the cpu to be able to run at its' fastest speeds?

I have 2 computers, both made by Elonex, Both have similar serial numbers
(So assume from the same batch), both have MS6390 boards in them.
One has USB2 (Enhanced USB Controller) shown in device manager
The other has not, are there different revisions of the same board?

I got a MSI KT3 ultra aru  mainbord, with the optional  D-bracket,
S-bracket and Usb2.0 cable installed. Thus there are two ports on the
mainbord, two ports on the D-bracket and  4 usb2.0 ports on the
usb2.0 cable (bracket).

I have had this board for some time.  One day the sound stopped working.
Sometimes, I can get a little garbled sound.  I have tried different
speakers, no luck.  I have tried to re-install the drivers, no luck.
This board has the sound built in.  Do those circuits go bad often?

can not boot up KT8NEO  MS- 6702  ver 1.0
starts to boot, gets as far as press F1, after this bios scren comes
up then shut down occurs.
turn power off. turn on same thing.