I understand that usb is the way to go but is it possible to rewire a
standard 15 pin game port joystick to a com or parallel port?
I've got a Wingman light joystick but ive no game port slot to plug it into,
So i would like to rewire the plug so i can plug it into a com or parallel

Howdy folks
I saw this Motherboard on MSI site and was wondering has anyone got one yet?
I need to replace my board by the end of may, and this looks like a good
choice

Hi and thanks very much in advance for any assistance...
I just put together a new system and everything is working beautifully
except that my HDD access light on the front of the case is not working.  
Actually I know it works because I plugged it into the power LED plugs

I have a MSI KT3-Ultra ARU motherboard equipped with 2 USB1.1 ports and 2
USB 2.0 ports.  The USB 2.0 ports are supported by NEC uPD720100 chip which
is EHCI (Rev .95) compliant. I understand that this was NEC's first attempt
at USB 2.0 chip.  When I attempt to use my portable USB 2 ...

I am going to setup a system with XP. It is going to have a 36 gig Raptor
10K drive and two IDE ATA 30 gig 7200K drives on Raid 0. Which drive would
it be best to put the OS on and which one the swap disk. The main use of
this system is for 3D visualizations so should I put my 3D ...

I have this mainboard, but i can't find information and manual anywere ....
has Somebody the some mainboard ?
Thanks !!!

I'm looking for manual about MS-7042. Somebody can help me, i can't  find
this mainboard on www.msicomputer.com ...
Thank you

dove trovo il manuale?
the manual?

I have 3 machines that have been in use on a win2k network for
approximately 18 months.  Suddenly 1 machine started to rebooting when
accessing network shares.  The problem just appeared from nowhere.
After reducing the clock speed from 133 to 100 mhz, the problem

I've just flashed the BIOS to version 1.8 because of problems with 1394 Net
Adapter not functioning properly. I used MSI Live Update for this.
Everything appears to be ok apart from when I boot up I get "NO BIOS
INSTALLED" message..The PC then boots normally  and  MSI Live Monitor ...

I have an MSI motherboard MS5169 with the versio 3.7 bios. My system
is pretty vanilla AMD K6-2 333Mhz, win 98SE,512MB ram, GEforce2 400MX
AGP video wiith 64MB, and an isa modem, and a SB PCI512 audio.  No on
board video or audio.  I just up graded to the SB PCI512 and my system

I have the above MB and Aspire X-Dreamer II case, which I am putting
together for my son. The case has two leds which I do not know where to
connect. They are a two separate wires named + P Led and - P Led. Does
anyone now where they attach to this board?

i am having troubles with getting audio signals from my sbracket
analog outputs. i use:
k7n2 delta2 lsr
jaud jumpering on mainboard looks like this

I looked on MSI's site FAQ and found nothing.  The manual for this
board states 1.1Ghz?  Is this true or can it do higher with the latest
flashes (PIII's go to 1.4ghz.)
Thanks for any info.

"You have been disconnected from the server.
Reason: Bad File Server is enforcing file consistency for
sprites/scope_arc_sw.tga"
I'm running a dedicated server on one machine on my wireless network and