tried to flash this today. Came back with incorrect CMOS settings and
failed. I did make a recovery disk and was able to roll back to 1.5 bios.
Anybody else had problems with the 1.6 flash?

I have a kt4 ultra and just bought an new volcano 7+. I install it the
machine will power on and then shut down.It happens when the hdd spins
up.I made sure that the connections are correct with thermaltakes site
and msi.any help would be appreciated

I have a curious fault on first boot up of the day,my "seagate barracuda ata
iv 80gb" is not detected, if I press
reset ,still no drive,it just hangs.However, turn off, then immediately back
on,then magically drive is detected and system boots up ok.This only happens

   I flashed to the new BIOS, and don't notice anything different.  But for
the updates, it says PAT feature.  Anyone have any info on that?  Below is
the link.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=434&NAME=M
S-6758

Thanks in advanced for any help I may recieve here.
I had to reset my bios...now my USB ports will not work on my KT3 Ultra.
Any ideas as to what I might do to get em working.  I have an Athlon 1800.
Thankyou,

Why when I listen to music and type at the same time I get random clicks and
pops from the speaker?
It also seems to effect online games when the keys are being hit rapidly.
Sticky keys are off.

I have 2 x 512 DDR HyperX DDR Modules
Model KHX3500/512
Rated at 434Mhz
And no matter what Bios up to 1.5 The machine hagns intermittlently...