I purchased a CoolMaster Centurion 5 case from New Egg to build a new
computer. I am using a Gigabyte GA-P32-DS4 motherboard.
There are two wires in the Centurion 5 with separate connectors that
are not labeled. They are white and green and they are twisted

I just recently bought a Gigabyte P35-DS3R with a 2.0G dual core
processor.  It has been working great, but I was installing linux as a
dual boot the other day and I put in an extra IDE drive on a PCI
controller and now it won't even boot.  It stops at the memory test and

I have a GA-K8N Pro SLI motherboard and am currently experiencing boot
problems.
I built the computer about a year and a half ago.  When I first built
it, I had problems with the machine going into the NVidia Boot Agent

The only way it will run is if I open a DOS box & type the exe file
name. Then when I close it down it stays at the screen. I have to use
alt-tab to get back to XP then click on the X-Close.
Now this database program has been running just fine in XP on my other

Allow me to start by stating that I've not only searched everywhere in other
forums, but I've also read the following post below several times to try
everything available:
http://www.hwkb.com/Uwe/Forum.aspx/mainboard-gigabyte/3587/Gigabyte-965P-S3-prob
lems-with-SATA-Hard-Drive-help

Mainboard is a GA M59SLI-S5
Already have a WDC WD3200KS which I play games on. I have another HDD
exactly the same and want to know if I can configure this for raid with the
above.

I wish to fit a Pent' 3 Skt 370 1 Ghz processor type SL52R to a 6VX7-4X F2
Motherboard.   The specifications for the M'board says that you can fit this
processor but I cannot find any references to the dip switch settings
required.   At present a Pent' 3 600 Mhx CPU is fitted.

I'm building a computer and need advice on what memory to get.  Systems
specs are:
CPU: Core 2 Quad Q9550 with a FSB of 1,333MHz (due in 1/08)
Motherboard: GA-X38-DQ6; supports 1,066MHz memory and 1,333MHz FSB

Does the on-board video have drivers for Win 98SE?
I'm looking at this board but need to duel boot 98 & XP.
Thanks

The software comes with my p35c-ds3r. Is it supposed to be a trail version
only? I am not able to find any cd key for it on the envelop nor inside the
mobo packing.

Hi Gigabyte mb experts,
I'm in the process of finalizing the install of my first Gigabyte
board, a P35-DS4 (rev. 2). I basically got it up and running under Win
XP Pro using an E6850 CPU, a ATI 2900 Pro video card, a 350GB HDD and

I can't enable CPU Host Clock Control in the BIOS.
I checked the FAQ for this board and the nearest advice I could find was to
update past BIOS F3.
I've never had F3, but had been using F10 and F12.

Can anyone tell me what is the fastest CPU I can put in this MB and be
stable?
Thanks,
Jerry

I bought this board off ebay recently (rev 2.0). Using the onboard
sound I get buzzing every time there is disc activity (sata if that's
relevant).
Do all boards do this or is mine faulty? What can I do, other than use

haroo
I've got an interesting issue with a Gigabyte 965P-DS3 board and a Western
Digital 2500KS drive (250GB). This board is configured with 2G DDRII RAM and
an Intel Core2 Duo 6600 uP running at 2.4GHz.