I have one of these boards and I want to clear the supervisor password
from the system, but it is resisting all attempts to do so.
Is there some way it can be cleared?

looking for AM2 compatible mobo with HDMI, 2 IDE connections, 4 gig 800 DDR2
memory and SPDIF if lucky.  Prefer to keep PCI RAID controlled- HDs but not
essential.  Okay with onboard video but will likely add separate video card
later.  Would appreciate mobo recommendations and ...

Anyone know of a dedicated Gigabyte forum on the web?   This group seems
pretty well dead.
RW

The IDE controller on my DS3 motherboard sometimes decides to take a
vacation. I only have my DVD and a CD drive hooked up to it, so sometimes I
never even know it's gone until I use these devices and they're not there.
In my system settings, there is a yellow exclamation mark ...

I have a GA-7VA Rev. 1.0 mobo with the F12 Bios and I have USB 2.0
problems.
It only seems to affect my wireless network adapter, currently a
Netgear W121T, after the adapter has been plugged in for a while,

I newly built a PC with GA-P35C-DS3R and clean install xp sp2. After
installing the chipset driver from the cd that comes with the mobo.
Everything works well with the administrator's account. But when logon the
xp as a power user, an Error window pop-up with message

Help Please,
My motherboard is a GA-7VA Rev1.0 and my only options for the speed of my
graphics card is 1x 2x and 4x unless I disable fast write then only defaults
to 8x.

Looking at 3 different Motherboards:
GA-P35 -DS3R
GA-P35C-DS3R
GA-P35 -DS3P

I plan to order as soon as I select a CPU cooler and memory modules. I want
to get 2x 2GB (4GB total) RAM, so that I can leave the other two slots open
for expansion to 8GB (using either Linux or Vista64 so I can take advantage
of the RAM).

I have a GA-P35-DS3R motherboard and device manager is listing two
unknown PCI devices.  I have used all my driver disks, but it can't find
a driver.  The only PCI device that I installed was a IDE hard drive
controller, but that driver was already installed and the hard drive is ...

Anyone know why a floppy drive would not work on a GA-P35-DS3R
motherboard.  I have tried two different floppy drives and two cables,
but they just sit there and spin and won't boot or read anything.
  Z.K.

I have a Gigabyte GA-P35-DS3R motherboard with 6600 core 2 processor.
System won't boot.  Cooling fan on cpu runs for about half second then cuts
out  (cycle repeats after few seconds).  Tried removing everything except
ram and cpu same result.  I suspect its a cpu fault would ...