Hy at everyone.
Yesterday I've assemled my new PC (all new) with gigabyte 965P-DS3 ,
but I've got some problem.
The Samsung 320GB -SataII HD- have a strange behaviors ; some times it

After spending a lot of time rigging a long-enough data
cable to reach from the mainboard's connector to the top of
the case where my 3.5 floppy drives reside, I see no way in
the BIOS setup to use more than one floppy drive!

I Installed CPU (E6700) and cooler, power supply (Seasonic S12-650) , and
plugged in power connectors (24 pin main, ATX 12V 2x, and PCIE 12V). I also
plugged in pc speaker.
I turned on and the board goes into a loop where it emits as series of very

Hi, I am using two sata hdd's as my main drives. Also have a couple of DVD's
burners and an IDE HDD for backup use. I have the bios set for sata and to
boot scsi. What bugs me is it does an IDE scan, finds nothing and boots up
which adds time to the boot process. Can the scan be ...

I've tried every which way to update the BIOS on my GA-K8NXP-SLI board to
enable me to upgrade to an AMD dual core cpu.
@BIOS is very flaky and when it does succeed the computer gives long beeps
ie the bios is frizzed. Luckily dual bios means I can go back to F6 version

I see different versions of this motherboard. Some of the online
retailers have great prices but don't tell the version. What is the
difference between the versions? I thought it was just the BIOS
version but I've been told it's more than that.

I have the GA-M55Plus-S3G board that has front panel sound connection for 8
channel sound, but my case has plugs for 6 channel sound, so is there a way
to make it work?
all the plugs are individual, not one solid connector if that helps?

I recently installed this motherboard (GA-MA69VM-S2) and it runs well.
However, when it first boots up, I see this message:"K8 NPT DATA CHANGE
PLEASE INPUT TO DMI" Does this mean anything to anyone? I have searched
the web and so far have found nothing useful.

Windows would not boot up, it said
windows could not start because the following file is missing or
corrupt:
<windows root>\system32\ntos krnl.exe

My son has a GA-7VA Motherboard with an Antec Plus 660 Case. The system will
power up, but the display will not sync up. The small green button on the
case continously flashes and the system never boots up. This is a three year
old system with an AMD 2000+ CPU. I have removed the ...

Gigabyte GA-965GMS2 MB.
1st time using SATA devices.
Asus DRW 814 SATA DVD Burner
Western Digital 1500ADFD 10,000 SATA hard drive

Hope someone can make some suggestions here.
Got a two year old PC here running winXP SP2. Been running fine for a
while then one day whenever you go to turn it off or reset via
software you get a BSOD at the very last second before you would

I'm trying to fix a friend's pc which has a gigabyte GA-7VKML mb in it.
Somehow it freezes when i want to install xp, changed memory and harddrive
but that didn't help.
So i figured i'd flash the bios to the latest for this mb to see if that

XP Home.....
The hard disk is showing up in task tray as a removable device.
???
I have notice this on the last 2 boards I have setup ....

Posted this problem some time ago in another group but it was never
resolved, trying again here.
PC appears to be coming out of Standby, there's HDD activity and the green
On LED is lit but nothing appears on the screen.