Just bought and installed As Rock K7VM3 board with Athlon XP2100, have a new
power supply, problem is it doesn't even attempt to boot, is there a way to
test whether it's the board or the processor that's causing the problem? I
know the Power supply is good, it came out of a ...

I see some of these boards on ebay. Some are r1, some are r2, some are
r4, etc.
What are the differences between the versions?
Thanks.

I have a Gigabyte 965P-DQ6 rev 2.1
Everytime I throw together a system, the USB headers screw me up.
The Firewire wires don't - they seem to have more consistent labeling.
Not sure why.

Hi all
First post
I have a GA-7N400 Pro2 (Rev 1.x) and when I shut down the system the
fan still runs and the CD light pulses. Is this a faulty motherboard ,

AMD sempron 2200 (1.5 gig)
GA-7VM400AM(F)
I purchased a 256 memory module for the extra slot on this board.  When
I plugged it in, I received no change.  I tried everything, including

any one got this board?  any thoughts appreciated
KK

FOr a board that is compatible with a P4 3.4 Prescott 640 with HT
What Gigabyte boards have two internal USB headers for case USB ports
and at least one internal firewire portr for the same reason?
I don't want to have two useless ports on the front of my case.

I've got a 8KNXP (Rev 1) that I've had in a box for 2+ years that I'm
finally assembling into a system.
It comes with some sort of small auxilliary board that plugs into it
vertically near the CPU - seems to have extra power supply circuits.

I got a new case and i wanted to see if i can get the front USB ports to
work.
Im not too bothered about the front sound ones yet.
GA-7ZXE

RAID 1 installation for GA-965P-S3
ok, i have 2 160gb hdd plugged into the gigabyte sata ports, the purple
ones.
i have presses "Del" and setup the bios to use the hdds as raid ones.

Happy Holidays
About a month ago, my PC began having issues during boot.  It would
"tick" quickly, the ticking would gradually slow, and then the fans and
PC would boot up.  I noted that reducing the voltage on the 12V rail

I'm new to SATA drives, and I just bought a Maxtor 200 gb SATAII HDD.
I'm running on an F6 bios, and I installed all the drivers from the
Gigabyte installation disc. But up untill now, my computer doesn't
detect the HDD AT ALL. Not in the bios, not in Windows Xp. So can

i've got motherboard GA-K8NF-9, BIOS F11 version,  with AMD 3000+ processor
When i was installed the second SATA hard disc, sometimes (ONLY sometimes),
during machine's start i'd got communicate:
"MediaShield IDE ROM BIOS 5.50

Well, it has been almost two years since I last posted here.  But much
like my previous post in ...
http://groups.google.ca/group/alt.comp.periphs.mainboard.gigabyte/browse_frm/thr
ead/9cc35c345943eb96/4a37f76dc82cf784?tvc=1&q=8knxp+vorwerk&hl=en#4a37f76dc82cf7
84
.. I now find myself ...

Could someone please give me some insights on this issue?
My machine is based on an older Gigabyte GA-7VTXE+ (Athlon XP1900+) mainboard
with an AGP2.0 slot (AGP 4x is max). The computer is set up with dual boot
for Windows and SUSE Linux 10.1. My previous GeForce 3 Ti200 worked ...