| Thread | Last Post | Replies |
|
| GA-K8nF-9 MB Drivers Update | 31 Dec 2006 15:35 GMT | 3 |
Hi, everyone.
I'm trying to solve a random Disk Error Event (ID 51) for my Maxtor HD.
I've just update the bios to F11 release, and checking for new drivers
for this motherboard at...
|
| Sound -> Internal Speaker | 26 Dec 2006 03:30 GMT | 2 |
how could I use the internal speaker for sound out,
so I do not have to attach external speakers?
greets
susanne
|
| hdd led not glowing | 25 Dec 2006 17:22 GMT | 1 |
hello friends...
plz help me out.... i have gigabyte ga 81915g duo motherboard, i have
pluged in all pins as power led, reset pin , power sw, and hdd led, in
front panel jumper, as shown in manual... i am not able to get hdd led
|
| 8irxp running P4-Northwood 2.6 FSB 800? | 24 Dec 2006 06:31 GMT | 1 |
according to this website
http://www.gigabyte.de/Support/Motherboard/CPUSupport_List.aspx?ProductID=1298,
the Gigabyte 8irxp mobo doesn't support any CPU with FSB800. Is it possible
to run the P4-Northwood 2.6 FSB 800 or any of the Hyperthreading processors
|
| Gigabyte 965P S3 ICH8 Sata2 Does Not Work | 21 Dec 2006 09:05 GMT | 3 |
I have tested two of these boards (Computer World replaced the first no
questions asked,thanks guys) and cannot get the ICH8 Sata controllers to
work normally - period. Installed OS many times using all four ICH8 SATA
ports as boot or data drives or boot only with no stable set ...
|
| K8N51GMF-9-RH - on board LAN don't work | 19 Dec 2006 17:59 GMT | 1 |
I just bought this motherboard and everything works fine except the LAN
controller.
the Windows identifies the device & the driver is the latest but I
still get this comment: this device cannot start (code 10).
|
| Is GIGABYTE GA-M55plus-S3G motherboard a good choice? | 16 Dec 2006 23:41 GMT | 3 |
I am planning to upgrade my old motherboard, CPU, Quantum 15 GB IDE HDD,
and video card in a few weeks because newer and upcoming games are slow
and choppy. http://alpha.zimage.com/~ant/antfarm/about/computers.txt
shows what my current primary/gaming computer is using. I am of ...
|
| SATA drive w/GA-7N400 Pro 2 | 12 Dec 2006 23:59 GMT | 1 |
I have had the above board running with PATA drives for sometime,
running very well. Time has come to replace the hard drives as they
are getting rather old. Bought a Seagate 500 GB to replace the old
drives. Physical installation was not problem but when I booted from
|
| k8n sli speed?? | 10 Dec 2006 22:46 GMT | 2 |
i can alter the htt, memory divider and FSB to achieve reasonable speeds but
the FSB clocks out at 290MHz. i use winXP64 and the latest version of fine
tune and can set the CPU to 2615MHz (Opteron 144) with FSB of 290 but after
that the FSB seems to be going up and the memory ...
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread