This board works OK with 1 256 Mb PNY DDR400 or 1 Kingston 512 Mb
DDR333.
However, if I fit either of these types in pairs,  XP won't boot.
Each of the 4 sticks works OK on its own.

3DMark06 and 7800GTX-256 single card and SLI
Compare url:
http://service.futuremark.com/compare?3dm06=151193
7800GTX dual card in SLI core 470 mem 1200

I recently opened up my PC to try and identify some new buzzing noises
I was hearing.
Upon doing so, I noticed that my chipset fan (the one with "Gigabyte P4
Titan" on it) was not spinning ??

I have just installed a Gigabyte GA-K8NSC-939 and all is fine. However, in
the manual there is mention of an (optional) SPDIF output cable with rear
bracket.
I canot seem to find this for sale anywhere. The Gigabyte site is useless as

I just read the specs and I don't see any mention of this, but I do see
this, which is vague:
"Integrated DDR memory controller
The AMD AthlonTM 64 processor improves the memory performance by

My Ga-K8N Ultra-9 had 2Gb of RAM. I've just added another 2gb of RAM to my
GA-K8n Ultra-9 motherboard, but Memtest is only reporting 3328Mb of RAM
(3407872Kb).
I know that some memory is reserved so you never see it reported at 4096Mb

I have a problem with an old pc which hopefully someone can help me solve.
Basically this pc if fitted with a Gigabyte GA-6BXE motherboard (Pentium II)
and I currently have an alarm sounding from it - not all the time but enough
to worry me!. It is an alternating high/low sound  ...

I just put together a computer with a Gigabyte GA-8I945P-G mother
board. It came with a utility to upgrade the BIOS. I ran the program
and it seemed to have worked but when i restarted my computer it failed
to reboot. The computer turns on but nothing happens. I am almost

I've got 2 1-gig sticks of memory. The post stops at mem when it should go
to:memory 2 gigs, etc. I removed one of the sticks, same problem, replaced
it with the other, no post. Do I have a motherboard problem? Could it be the
Video card since the partial post shows up on the ...

just thinking about spending my GA-8IRXP motherboard a new processor to
gain a little more speed. Do you know which processors can be used above an
Intel 1.6 P4 Northwood?
BTW: I overclocked already this CPU to run at 2GHz. Though it should be a

hi there all!
Just bought some new ram for the above mentioned gigabyte board only to
have no END of problems..
just to clear one thing up, the are IDENTICAL exept for the

Can anyone tell me if the board listed inh the subject line will
handle a Seagate 250 Gig UDMA Hard Drive? I can not find any
information on this anywhere.
Thanks,

I have this board running an XP2500+ (Barton) at standard speeds. The CPU
temperature is reported as 57 C at idle but if I feel the heatsink it's
barely warm (certainly not uncomfortable to touch). So, I'm wondering
whether the temperature is being repoted incorrectly (BIOS and ...

Heres whats happening My Kid has a P4S8X-X and the monitor went black
so I had a look and restarted it and it woundn't startup just stayed
black not beeps nuttin so I thought the celron 2.6 had die , So I put
the cpu in my GA-8KNXP and it started up no problem so next I tryed the

A friend brought me his computer to see if I could make it start correctly.
When you first turn it on, it starts a steady beeping (2 seconds on, 2
seconds off). If you keep hitting reset, it will finally stop beeping, then
a few seconds later a single beep, the video turns on & ...