Hi. Not sure if this is a motherboard, OS, or hard drive problem, but
I've tried a few message boards with no luck.
I am trying to add a new hard drive to an existing RAID setup. I don't
want this to be part of the array I already have...I just want to have

I've updated my Gigabyte K8NS bios from F6 to F17.  The update seems to
have terminated successfully (message appear).
Unfortunately I'm not able to boot my PC.
During the boot process screen remains black and the motherboard repeats

I have a Dell OptiPlex GX280 system that was damaged in the Katrina
flood.  It only took a few inches of water but sat in it for about 2
weeks.  The case, MB and video are shot.  Everything else RAM, CPU and
drives was above water.

HELP !!!
During operation and shutdown a pc has occasionally BSOD's:
STOP Error 0x00000077 ( 0xC00000A3, 0xC00000A3, 0x00000000, 0x00C79000 )
MS KB: 0x00000077 and 0xC00000A3 point to "Drive not ready".

I have a Gigabyte GA-6VELM Socket 370 motherboard. My computer has
started to lock up on me recently. I popped the case, and found 3
capacitors leaking some goo from the top. These 3 capacitors are right
next to the processor. When the case is upright, the heat from the CPU

I am looking for a motherboard that will hold 2 or 4, socket 478, P4-
1.5GHz CPUs.  5 PCs at my office were flooded by Katrina.  They were a
total loss and I have ordered new systems.  But looking at the systems, I
noticed that although the water came up half way on the MB, the ...

I understand the GA-K8N Pro SLI requires a BIOS update for use with a dual
core processor. When starting from scratch can the BIOS be updated with a
dual core processor in place?
Graham

http://www.gigabyte.com.tw/Motherboard/Support/BIOS/BIOS_GA-K8NXP-9.htm
Flashed, bios is dated October 14th 2005. Sadly the NVRAID bios version is
still 4.84, even worse is that the bios version for the Sil3114 controller
is still 5.1.39, there is a much more recent bios version ...

I have problem connecting to the internet after I update my BIOS from F1 to
F7.  I tried going from F1 to F6 and it's the same result.  Do I need to
update the BIOS in sequence?  I.e. F1 -> F2 -> F3... etc.
The internet is working fine in version F1.  When I did this test, all the

So i have a Gigabyte 8 sigma series mOBO. It has Azalia sound device
built in. Well all of a sudden my sound quits working, so I put back
in the  MOBO cd and reinstall the drivers. Now i have sound but it
only allows me sound to my Fronts and Rears and not my center and sub

I have two 512 Corsair sticks running in dual channel already.  I have
another Ultra 512 stick.  If I were to buy another Ultra 512 stick
exacltly the same, and put that in for Dual Channel Operation also,
would there be any problem?  I have seen that having the same

http://www.gigabyte.com.tw/Motherboard/Support/BIOS/BIOS_List.htm
We should see some updates for nForce 4 motherboards soon.

I've just bought some parts to upgrade/rebuild my PC:
o GA-K8NF-9 motherboard
o AMD 64 3000+
o 2 x 512MB Kingston RAM

http://www.gigabyte.com.tw/MotherBoard/Accessory/AccessoryList.htm#02
Does anyone know how to obtain these items, as i can you purchase them?

http://www.gigabyte.com.tw/Motherboard/Support/BIOS/BIOS_List.htm
I am hoping this is the first bios update that will cover all nForce4
motherboards. If you have this mobo and flash to F8 can you please report
back any differences you notice, date of the bios etc.