Hi all, I have just upgraded the motherboard in my PC and now I have a
problem.  The system works fine apart from the fact that whenever I plug a
Sony digital camera (I haven't tried any other brands as I dont have access
to any, but I have tried 3 different model Sony camera) into ...

I've got a 8S661FXM with an odd problem. I'm trying to use 5.1 sound,
and I've got no sound from the front left and front rights speakers.
I've tested the speakers on other systems, and other speakers on this
system, and determined the problem is in this PC.

I have two SATA Drives on ATA1, ATA0 - ICH5R  connectors.
What do I have to configure if I want to add one to the ATA0 - Sil3112
connector?
What do I have to configure in the Bios settings?

     1 x AMD (Venice) Athlon 64Bit 3200+ Socket 939pin 512k L2cache 90nm
Retail Boxed Processor 88109 £106.76 £106.76
     1 x Kingston 1GB DDR PC3200 400MHz Non-ECC CL3 (3-3-3) 184pin DIMM's
(Kit of 2 x 512mb) 49296 £59.14 £59.14

The computer was working,  then all of a sudden,  The board does not
boot up with video.    When I power up the system all seems OK.   But no
video.   I tested the RAM,  Changed the RAM and PS and video card.   but
no help.   The system seems to start OK, no beeps that any ...

I can't really tell on the beeps, but to me it sounds like 1 short and
3 long beeps.  I've replaced the motherboard, PSU, RAM, removed video
card all to no effect.  From the manual there is no code corresponding
to the beeps I'm getting.  At this point I'm at a loss to the problem.

I think of replacing my second 80GB hard disk. But before I do so I need
to know if there are any known restrictions or issues regarding the disk
size. Does the BIOS F7 of the GA6-7N400L deal with a 200GB hard disk (or
bigger) without any problems?

Hello,
I have recently changed my config for a Gigabyte GA-K8NS ultra 939
with an Athlon 64 3500+ Venice. Evrything went fine and I install XP
Pro SP2 as O/S. However, when I tried to connect to the web through

Just to report that with the F9 Bios I can run Cucial Ballistix 4x512 MB
sticks @ 200MHz (400DDR) when the previous highest it would reliably run was
180MHz. I always thought the 4 populated DIMM slots and not being able to
run RAM at 200MHz was an something I'd have to put up ...

Bios Version : F7
OS : Windows XP Pro SP2
Controller : NForce4 Ultra (Not Sil)
I seem to be having an issue whereby the K8NXP-9 seems to hate SATA-II

Just wondering if anyone could give me a few pointers? I have the 7N400 Pro2
Mobo and currently have 1.5Gb (3 x 512Mb sticks) of DDR. I recently bought a
1Gb stick as I wanted to upgrade to max ram (3Gb) but cant get system to
boot with a 1Gb stick installed.

P.S.:
The last part of the video says it all:
Pentium 840 EE faster for multiple applications.
Right now I have 14 applications open and this is only a light load:

I have just recently upgraded to the GA-8KNS Ultra 939. At present I
havea Maxtor 80 GB HDD ATA 133. I work wit a lot of large files so my
HDD takes a lot of thrashing. I dont really want to spend a lot of
money so I thought I would add an additional 80 GB HDD and set it up

I love Gigabyte but it was second time my GIGABYTE MOBO died this year both
about 4 months old.
I use GA-8I848E-L.
Last night my PC was awesome healthy and I start play HALF LIFE 2 into 10

I've OC my computer but I'm not too sure what the temperature when the
case is closed. Can anyone recommend some software that does the job
(freeware would be good).
cheers