I just built a system with this board and I'm trying to get it to work but
it's hanging when Windows 2000 Server is in the startup sequence. (The first
reboot after setup finishes, at the point where it says Windows is starting)
Also sometimes the board fails to detect the hard ...

I installed an SATA drive and loaded XP Pro while two IDE drives were
attached. It would boot from the SATA after it showed an option screen of
two instances of XP from which to boot. If I removed either of the IDE
drives, it wouldn't boot from the SATA. I reloaded the SATA as ...

My power supply blew out a week ago so I bought a new case with a power
supply since the price was right and I wanted a new case anyway.  I
installed everything and the computer boots into Windows fine, but I noticed
the heat sink and chipset fans were not moving so I shut down.  ...

I just upgraded to the GA-7N400 Pro 2.  I have 4 Western Digital hard
drives.  2 of the HDD are on IDE1 and the other 2 are on IDE3.  RAID
is being used as a regular IDE controller.  In the bios I?ve switched
the GigaRAID funtion to ATA and disabled the SATA, but for some reason

I built a PC for a mate and it randomly crashes when playing
fast 3D games  ie. Richard Burns Rally, new Colin Mcrae
Specs:
Gigabyte K8NNXP

Does anybody know if there is anyway to make a PCI graphics card work
with the GA-6WMM7 rev2.0 mainbord. There is a bios option
PCI/PLUG AND PLAY SETUP > Primary Graphic Adapter > OnBoard VGA or
AddOn VGA

having beeb an Abit user on all my pc's i now want to switch to the new
gigabyte board. It is only just becoming available in the uk and i can't get
my hands on one yet.
Does anyone have this board and if so does it seem to be ok. stability is my

I am having problrms trying to do a fresh instal on the following system
Gygabyte  81pe1000 Rev 2.
P4 2.4 533.
512 DDR4

Been having a rebooting problem along with just plain video loss and
scrambling for over a month now. Machine is as follows, (new):
AMD Athlon 3200+/400fsb
Thermaltake silent boost HS & fan

I'm thinking of upgrading my cpu and memory. Memory would be kingston 512Mx2
3200 (FSB400) for the dual channel benefits. Does the cpu FSB need to match?
i.e. can cpu be 333 or 400? newegg has nice deal for the kingston memory and
2700+ 333. I could pay the almost double for the ...

I am trying to set up this system with a GA-8ISXT-FS motherboard. Everything
is working fine except the floppy drive. I tried 3 different known working
drives and cables. The drive light goes on but it cannot read any disk. No
flags in Device Manager. It will not boot from a floppy ...

I've got two SATA drives connected to the SiliconImage controller (didn't
like nVidia's at all) and have them in RAID0 config.
I'm trying to install Windows 98 (already have WindowsXP on it), but when
the computer is booted by a Windows 98 Boot Disk I get this message when

I've got a Ga-8I875 mobo and I'm having some problems with the newest
audio drivers from Gigabyte so I'm looking at downloading new
drivers.Does anyone know if Realtek publishes it's own drivers for the
ALC658 chips?

Hi all, I'm having a bit of trouble working out how to organise the ram in
my new motherboard (GA-8IE800).
The manual states that the board can take up to 2gb, now I have found in the
manual that it says it can take only 512mb simms, but it only has 3 slots so

This might seem silly but I was wondering. Some of the gigabyte boards come
with stickers on the heat sinks. Things like 'gigabyte' or 8X or whatever.
My question is do they inhibit the heat removing
abilities of the HS? Would it be better to remove them?