The system temperature on my computer is always higher than the CPU
temperature. For example, the current CPU temp is 41.1C, while the system
temp is 47C. The relative difference remains constant even under load.
From a thermodynamic standpoint, is that even possible?

New 3.59 drivers can be found here, no idea if they are WHQL certified or
not.
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Sof
tware=True

I have just installed a GA-7N400-l Motherboard with a Athlon XP 2200+
processor on Windows XP Professional all is working fine except when
I go to the General  tab in the control panel the processor shows up as a
Athlon XP 1500 +

The promise udma66 controller on the 6BX7+ can be modded to support raid.
I'm just wondering if anyone has done this and if there is a modded bios out
there I can use.
Regards,

My boot/system drive is SCSI and my multimedia drive is SATA.  Most but not
all the time when I start the system with the SATA setup in Auto mode, I get
the blue screen of death immediately when my username and password are being
checked.  When I don't get the BSOD, personal ...

To make a long story short, a friends kid wants to upgrade his machine and
chose this MB as the first step.  I thought it wasn't a bad choice in that
this is the board that both his father and I have been running for the last
6-8 months.

I deactived the on board sound during the Windows installation and
everythings worked fine and I used my PCI Sound Blaster Card. By now I want
to active it again. In order to do so I set the BIOS Option to Auto, but the
On Board Sound is not detected by windows. There is simply no ...

I want to replace my North Bridge fan with a Papst fan and would also like a
new connector for it...  Anyone know where???  I have looked at DigiKey and
my God what a huge catalog...  I have no idea of the exact name, could
someone help please???

I have revision 2.1 of the Gigabyte GA-8KNXP, today i removed the
Northbridge as i want to install a Microcool Northpole Northbridge.
http://www.sidewindercomputers.com/minochcokit.html
The Northbridge came off very easily as it's a brand new motherboard, i then

http://www.overclockers.com.au/article.php?id=179581&P=2
I can use my existing raptor, add my new raptor and the software will create
the raid 0 array for me?
Cool.  I like easy:-)

Contemplating getting a 8KNXP with a P4 2.8 (maybe 3.0) but can't
decide if I want to get the Prescott. I don't expect to overclock and
will probably get stock pc3200 memory (Crucial or Kingston). I'm
somewhat worried about heat problems with the Prescott with the

My second raptor drive just came in.  I'll prolly switch over around
wednesday night.  I'm using an 8KNXP ver2.0 and plan on using the intel
controller.
I'm going to scan the ng once again and pick up some helpful hints and was

Is there a motherboard that support socket 370 processor (celeron) with
onboard USB 2.0 port or socket 370 was already obsolete when usb 2.0 was
onboard.
Thanx

Anyone using one of these?

I built a PC for one set of cousins and they're very happy.  Now the
others are jumping on the boat.  But these people want to go even less
than $600.  Maybe around $300.  This is what I have so far.
My question is, should I go with what I have or make some changes?