I have a relatively new GA-XKNP Ultra.   I'm experiencing unscheduled (not
initiated by the PC operator) system reboot problems using Windows XP.  Has
anyone experienced similar problems?  My main suspicion is the ATI 8x video
card, but I don't have a solid reason for that to be ...

Is there anything (bad) I should know?
I am not a big overclocking nut, but I would like to be fairly sure I can
get 210MHz or so out of my Barton 3200+. Will that be a problem, do you
think? I know that will mean running my PCI bus at 35MHz and AGP at 70MHz,

i was wondering, what ever1's oppion on the GA-8KNXP Ultra-64 and when
is going to  be for sale?

I ordered up the parts to build up the new system.
Giga-Byte GA-7NNXP
AMD XP 3200+
CPU Cooler - ?

I have a gigabyte K8VNXP for the Athlon 64 and it has two ethernet
ports, one 100 Mbps and a gigabit.
In the manual is says it has "Built-in RTL8110S (10/100/1000
Mbit)(LAN1)" and "Built-in RTL8201BL (10/100 Mbit)(LAN2)" in the manual.

Has anyone had the problem where thier UDMA6 drive (ATA133) will only run in
UDMA5 mode (ATA100) ?
BIOS is set to AUTO for UDMA on both channels.
Of course I have an 80pin cable (otherwise, i wouldnt be getting ATA100....)

Does anyone have a similar setup?
I'd like to buy that heatsink but i dunno if it's gonna work...
Thanx to anyone answering
ASC

Hi;
I'm building myself a nice new PC. This is a first for me, and I'm a bit
nervous that I'm about to do something expensive before I even start
installing the processor.

As a second part to the my preceeding question:
Does the 8KNXP accurately report the +5 voltage?  HMonitor is showing my +
5V as varying between 3.98 and 4.06V, and aux as +2.61V.  I've not had a
single instance of unexpected behavior or poor performance in five days of

Thinking if upgrading soon to socket 754 and Athlon 3200 64 bit.
In the past I've done it all from scratch, built the machine then install a
fresh OS.
This time I want to play it different. I'm hoping to just bung in my

Does anyone know why my chipset's fan on my motherboard makes a big noise
that's harassing me? I would like to solve the problem but I don't want to
burn the chipset also. Can anyone help me with this?

   Just installed one of these boards and seem to be having temp problems.
CPU Temp reads 58 - 63 degrees and board temp 35-40 degrees. System appears
stable!
CPU is an AMD XP 3000Mhz.

I have tried my new 2 x Adata DDR500 in my 8I875 and in my friend's 8KNXP.
No matter what i set the memory timings too (SPD, the manufacturer's spec of
3/8/4/4, slow, fast etc etc) or what i do with the voltage, i cannot get
either computer to boot with the RAM running at DDR500 ...

I've tried something that I 'thought' would work but didn't. I have a Barton
2500 that's about 14 months old and should be unlocked. I set the clock
ratios manually on the board to what should be a 12X multiplier according to
the manual to see if the processor is truly unlocked or ...