The voltage reading from CPUZ on my 8KHA+ is pretty steady, varying only
between 1.504 and 1.520.  On my 8RDA+ with bulging caps it fluctuates
between 1.44 and 1.64 and changes quite rapidly.
Do you suppose the leaking caps are causing this?  The board seems solid

How can a manufacturer's site be so slow?  I'm downloading the nVIDIA system
utility for my 8RDA+ and it's poking along at less than 10KB/sec.  Last
weekend was no faster.  The store site took about 2 minutes to fully load.
What are they running as a server, a PC-AT?

The Continuing 4PDA2+ nightmare.....
Antec SLK3700BQE case
P4 2.8 ghz
2 - 256 meg PC3200 crucial, dual channel

Just bought my kid's 8RDA+ and I see several of the caps are bulging with
some brownish crud on them.  He hadn't said he had any problems, just wanted
a faster system.  Once the caps start bulging, is there any timetable before
I might start seeing problems?  My 6 yr old 8KHA+ ...

Today I upgraded my 2nd PC, a Win98SE machine which is used as a 2nd
internet terminal.  I replaced a Socket 7 mobo with my son's 8RDA+ with a
1200mhz Duron and 256mb RAM.  I transferred the only 2 cards I was using:
low end Geforce (MX64 from LeadTek) and LAN card.

Hello, I have had this system running with XP SP2 and an IDE WD 80gig
drive for some time now. I picked up a SATA WD 80 gig drive with the
intention of replacing the IDE drive. If I have the SATA drive hooked
up, regardless of where, the system won't boot. It hangs during post.

I posted an earlier problem with USB device not recognised, that is the
USB ports on the Mobo.
I put in a PCI USB card and that works, but how do I get the Mobo rear
and front USB ports working.

i have a 8kha+ epox mb and a sil3512 pci sata controller, and  a
seagate sata hdd
i was happy with this set for a month, and a week ago smth weird began
to happen: