About a month ago, I ordered a motherboard from www.epoxstore.com.  A
week to 10 days later, I got my credit card bill which had 3
unauthorized transactions on it -- all dated after the transaction at
Epoxstore.

My 2nd 4PDA2+ has failed. Ram Channel B seems to be unstable. It has
bulging/leaking caps clustered around the AGP slot. I assume this is
the cause, though it is quite possible that it is not.
The first 1st 4PDA2+ also has bulging caps (fewer) but was perfectly

Suggestions most welcome :)
I have just prior to Xmas bought and now set up an Ex5-320n but it has
a couple of problems.
Setup:

I have three 160gb PATA hard drives.I bought a PATA to SATA adapter for my
main drive.the problem is when I install the Nforce 3 ide driver it will not
boot.it freezes up when I can just see the Windows XP boot up screen.the
serial ATA does not like the drivers.can anyone help ...

Their boards always used to get raves from the motherboard sites.  They
don't seem to be very popular anymore, at least based on the lack of traffic
on this site.  Did they produce some dogs or did the other manufacturers
just pass them by?  Just curious.

I think I've got bulging caps in this mobo. 5 or 6, mostly clustered
around the AGP slot. EC26 and EC27 are examples. This computer is now
suddenly a crash monster--random spontaneous reboots from stop various
stop errors.  Increasing instability, which prompted mobo examination.

Should a AMD ATHLON XP3000 400Mhz cpu clock down to 333 if my board only
goes that high?
My system turns on for 3 seconds then turns off.  Nothing on screen and I
have the latest bios.  I can't get to the bios setup screen anyways.  I know