| Thread | Last Post | Replies |
|
| 8k3a+ and 2800 barton...does temp monitor show accurate temp? | 28 Feb 2005 13:15 GMT | 7 |
howdy all
pretty much as the subject says, have an 8k3a+ board with the correct
revision number to support the 2800 barton, which runs fine in the
board. only issue is that the temp is showing fairly high, between 60-70
|
| Epox (Pronix) | 22 Feb 2005 17:04 GMT | 6 |
i have an old Epox (Pronix) Board and can't find anything about it. I
googled it but nothings turns up, even the epox site can't feed me with any
information on this board.
I have an Epox 8363-686A with a VIA KT133/A Chipset and an AMD Duron 700
|
| ep-7kxa | 19 Feb 2005 00:29 GMT | 3 |
im a proudly owner of an computer as follows
board ep-7kxa (manual: http://www.epox.de/dl/techsupp/mu-7kxa+010.pdf)
cpu amd k7 600mhz
ram 1x 256MB + 2x 128MB sd-ram pc-133 cl3
|
| 8RDA+ with post code 26 | 13 Feb 2005 20:48 GMT | 4 |
I've got an 8RDA+ that is throwing a post code of 26. I can't get it to
boot up at all - no video, nothing.
Looking through the archives, I see that a video card could be the
problem, but the system was running with the present video card until
|
| 8KTA3 + Pro Bios Chip Part Number | 10 Feb 2005 04:46 GMT | 3 |
Does anyone know the part number for the EPOX EP-8KTA3 + Pro? Thanks.
Chuck
|
| Broken capacitors in 4PDA2+ with RAID1 matrix | 09 Feb 2005 19:56 GMT | 1 |
I have got a nice shortage in my 4PDA2+ with RAID1 matrix built with
"onboard" driver. The mainboard is totaly broken.
The thing I need to do is to restore data from HDD's.
The first idea was to buy 4PDA5+ and set up totally new server with old
|
| 8KMM3I and addition of a SATA HD as additional storage | 08 Feb 2005 22:51 GMT | 2 |
I have an EPOX VIA KM400 EP--8KMM3I with an 80 gig Maxtor ATA/133 hard
drive. I want to add a 250 gig Maxtor SATA drive as additional storage.
What do I need to set in the BIOS so that the WinXP OS will still boot on
the IDE drive? Thanks.
|
| Advice on which board | 08 Feb 2005 21:59 GMT | 2 |
Hopefully in about a month I will be upgrading my computer,Probably going
with a athlon 64 3400. I have owned several epox boards in the past and have
always had good luck with them. I will just run 1 drive on the system and
thinking of getting the Wester Digital Raptor drive. ...
|
| 8KTA3+ AGP | 06 Feb 2005 16:28 GMT | 7 |
I have an 8KTA3+ mobo with a AMD Athlon 1Ghz processor. I have the latest
BIOS (7/29/2002) and the latest 4in1 drivers loaded. I have been running an
older AGP 2x ATI all-in-wonder card with no problems. I just bought a ATI
All-in-wonder 9600 AGP 8x/4x. I looked in the 8KTA3+ manual ...
|
| 8RDA+ replacement | 06 Feb 2005 16:14 GMT | 1 |
What is the 'best' replacement for an 8RDA+ motherboard?
Thanks for the info!
 Signature
Michael Sovitzky
|
| 9NPA+ | 03 Feb 2005 18:47 GMT | 2 |
Anyone heard when these might hit the states. I have read some reviews but
can't find any of them yet.
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread