I'm looking to upgrade the 4-in-1 drivers for my Epox 8kha+ mobo.  It
has a KT-266A/DDR chipset.  Can someone porvide a link to the latest
non-beta drivers?
Also, when installing then, can it be undone easily using Goback (if

My board is having a problem and I'm trying to find a new 8k3a+ or
something in which I can still use everything off of the motherboard.
Any suggestions?
Glee

During bootup (and I can see this in the BIOS, too) I see
that my "Power Fan Speed" is only about 1100 RPM and
is showing in red.  The other fan, the "CPU Fan" is going
about 1200 RPM.  Recently, my PC started overheating

I have an Epox EP-KA8R M/B that states on the box that it has USB2,
but when
I plug a USB2 device ( Card Reader ) into it,it doesn't work, (the
reader works on a friends PC with USB2 installed, so I know the card

My old 1.4Ghz athlon system 8KTA has always run hot so I grabbed a spare fan
from
work the other day. Big chunk of solid copper and a fan twice the size of
the standard athlon cpu cooler. I fitted it and re-started my computer. The

Hi people,
I seem to have a prob with my m/b at the moment..........when I turned it on
this morning, it wouldn't boot up...all I got was a continuous 2 beep tone
(it sounded like a cop siren)...the led on the m/b said CF??, but when I

My  8KHA+ just came back from Epox after the caps failed. It started
out with a cold boot problem. It wouldn't boot from power on but would
boot from the reset button after the power on failed. It has
deteriorated to the point that it required the cmos be cleared before

hallo alle,
ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2 Tastatur
nicht annerkannt wird, wenn ich IDE-Device anschliesse. Nachdem ich die
IDE-Device (Festplatte und CD-Rom)rausgenommen habe, wird die Tastatur

I have been using the 8KHA+ since the fall of 2001. It was the first time I
built a PC from scratch, and it brought me into a new level of performance
and expertise. The board had been running with a slight overclock (bus
pushed to 140 MHz) with the Athlon MP 2800+ CPU which ...

I've got an EP8-KRA2+ with a 2500 Barton doing 2315 Mhz.  I've tried
using various motherboard monitoring software with little success,
apparently.  Hmonitor pro and MBM5 both show CPU temperature staying at
32 even when I turn down my variable speed fan and put the system under

I've tried upgrading my RAM to 2 sticks of  512MB DDR-SDRAM.  both are CAS3
but by different manufacturers and both work great singularly but united
they are unstable and crash the system.
do I need to flash the BIOS or something to get the 2 to work.

Hey folks, I have a EP-8KT2L (KT133E chipset, sort of half way between
KT133 and KT133A) running XP Pro (and SuSE and Redhat, but lets not
cloud the issue).  It  was stable (well, XP had accumulated plenty of
cruft and some problems, but I didn't want to muck with GRUB and

After installing my new AthlonXP2600 CPU in my 8Kha+ (Rev 2.0), I got a
message upon boot-up to adjust my BIOS settings.  At boot-up, it showed
that this CPU wanted to run at 133x16 (2.128ghz), so I tried upping the
multiplier to 16 and found that my BIOS only went as high as 15 ...

Should I unsubscribe?

My computer died.  When it tries to boot it stops at C1.  It was not OC.
I removed the HD, CD, & all cards & still get C1.
Any suggestions?  MoBo?  CPU?
Thanks,