| Thread | Last Post | Replies |
|
| Best IDE driver for 8RDA+ | 30 Nov 2004 19:17 GMT | 3 |
I have tried to install newly released drivers but I get
http://mywebpages.comcast.net/dl1027/files/ide_error.jpg . Anybody having
any luck with any driver other than the standard WinXP driver?
DaveL
|
| USB 2.0 Problems EP-8RGMI | 22 Nov 2004 14:48 GMT | 1 |
I've been using this board for a year or so and its been great, but I've
been doing a rebuild in a new case and I'm having probelsm with USB 2.0.
Format HD and install XP Pro - no problems. Then install device/chipset
drivers and all is well. Last device left unknown is USB host ...
|
| Epox 8K7A at 3000+! | 21 Nov 2004 02:25 GMT | 2 |
Hey all,
I don't mean to brag but I now have my good old Epox 8K7A overclocked to 2160 MHz (15 x
144) with an Athlon XP2400+.
Still not impressed?
|
| MB 8K7A+ Post Code 8b | 19 Nov 2004 03:28 GMT | 2 |
I get a post code 8b often when cold booting my machine. Hitting the
reset normally allows it to boot normally after it halts at 8b. Does
anyone have any idea what that post code is?
|
| OC XP1800+ | 15 Nov 2004 23:21 GMT | 5 |
My Athlon XP1800+ runs @ 133Mhz FSB. I want to be able to OC it to either
166 or maybe even 200.
My DDR is PC3200 DDR400. Anyone who knows this board and chip please give
me their experience with this.
|
| Firewire pin assignment 8RDA+ | 15 Nov 2004 05:25 GMT | 2 |
I want to connect my case firewire port to the onboard Epox firewire. But the
manual doesn't have the correct pin assignment. Anyone know the correct pin
assignment?
|
| EP-4SGM8I sound problems | 14 Nov 2004 20:02 GMT | 10 |
I've had lots of problems with this mobo (Built into machine when I
bought it) and although I've flashed bios a couple of times I've
always put it back as it was as it seemed to make things worse if
anything.
|
| 8RDA+ Power-on by Alarm Where is the date? | 14 Nov 2004 18:33 GMT | 1 |
In the Bios Setup Utility you can set the Power-on by Alarm to enabled
and it is only possible to set the alarm time (hh:mm:ss). There is no
way to enter the date (day of the month). I am using the newest bios
from the epox homepage. The Bios is dated to the 07/29/2004.
|
| 8RDA+ & 1800+ 50 degrees | 10 Nov 2004 22:38 GMT | 3 |
I have the abonve board and chip and my cpu temp is usually 49 degree
celcius and sometimes goes up to 50 or 51. I am using the stock fan. Is
this a normal temp?
Hugh
|
| 8K3A - Need install tips | 09 Nov 2004 15:04 GMT | 1 |
Just got this motherboard and before I put it together I was wondering if
anyone out there had any tips or recommendations or anything I should pay
close attention to. Particularly performance enhancing suggestions, I was
thinking about exchanging the heatsink on the Northbridge ...
|
| looking for OLD BIOS 8RDAE | 09 Nov 2004 14:25 GMT | 1 |
I`m looking for 8RDAE BIOS dated on 2003.
On Epox site there is only the newest one from 2004.
I`have uptaded to the newest one from 07/2004 and
since then i have some troubles with my computer.
|
| BIOS for 8KTA3+ | 08 Nov 2004 08:36 GMT | 1 |
I have found a BIOS for the 8KTA3+ from the 21.06.2004, on www.epox.nl
Why it's only on this site and not on www.epox.de, there is the newest BIOS
from the 09.04.2003
And there is no Release notes, what's the difference about the BIOS from
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread