...after about 1.5 years of use. I don't know when those 3 caps started
bulging but noted it a couple of weeks ago when my box started coughing and
rebooting out of the blue. Here a link to the photo:
http://users.bigpond.net.au/ozcon/Epox/IMG282.JPG

Hi
I have a Epox EP-8RGA motherboard, I was using my PC last night when
the screen when black, I thought the PC crashed as the lights on the
tower were on, as nothing was happening in the screen I press

On an 8K7A+ I changed my bios setup for usb keyboard and mouse. I now can
not get back in to change it back as the keyboard will only work under
windows. I can not access the bios setup as it will not read the usb
keyboard on startup. If I clear the cmos by jumper lp1 will the board ...

My venerable 8K7A+ (I use Win98SE on the primary drive) began showing signs of
age and infirmity, so I replaced it with a 9KA2+.  Except for USB, all worked
out smoothly.
I cannot for the life of me get USB support with this board.  I used a simple

I've got a problem with my PC which has a Epox 8KHA+ motherboard. If a leave
the PC alone for a while, it gives me the blue(ish) screen with the "Call
your hardware vendor for support"-message. Does this have something to do
with the leaking capacitor-problem?

I have the Epox BRDA+ MB and it says the firewire is Optional. I have the
connectots attched to the board and the firewire rear panel but I get
nothing...any ideas?
Thanks

Hey there,
my new and flashy 8HDA3+ crashed on me about a month ago. For no particular
reason by the way. So I got a brand new 8HDA3+ after complaining. The old
mobo had two SATA disk on RAID 0, so with shaky expectations I connected the

Anyone using 2GB ram with the 8KDA3+.
IF not anyone think that I COULD use 2GB ram with this board???
Getho

Is this motherboard available in the USA?