there's now a new version of 8rdavcore available at http://wwww.hasw.net
8rdavcore allows the changing of voltages, chipset parameters etc. on
some nForce2 boards.
Bye,

I just got 2 sticks of 64MB PC66 SDRAM (DIMMS) for my Epox P55TV2, and
when I install the memory in the motherboard, BIOS is only displaying
32MB total.  From the part numbers on the memory (HP 8M64) these appear
to be 64MB SDRAMs.

I have an OLD Epox motherboard, a "P55TV2".  I've been able to download
the motherboard manual from Epox's NL website:
www.epox.nl/manuals/p55tv2.pdf
I know that this motherboard is working, but I had taken it out of the

Thought I'd give RAID a little peek and test, but this seems a little more
complicated than I presumed. In the user manual it says; "When the system
powers on, wait for the following screen to appear and press 'Tab' key to
enter BIOS configuration utility"

I've done some digging on EPOX's website, but their information seems out of
date for these older boards.  I have both boards running the latest drivers
and BIOSs they can support, and I'm wondering just what is the ceiling of
CPU I can put in them. I have two PCs; running one of ...

I've been looking around and around and around now for a good application
which can turn off that annoying chassis fan when the cpu temperature is
super minimal. Unfortunately none of these has worked so far. Any
experiences out there on that subject or should I just rip the power ...

Will the 8KTA3+PRO work with the 1.35 volt mobile Athlons?

I am getting event id errors 7000 for asctrm and kmdpl services not
found errors.  Any way to clear them up?  I have stability issues I am
working on for my wins xp pro, ep-8kta+ mobo.

I have a 8kta3+Pro which I just tried to bios upgrade, with 8K203528.bin.
It went about 3/4 of the way through and said "Checksum Error" and then
rebooted.
Then it say's "Insert system disk and press enter"

I'm thinking of upgrading my 640Megs (256-256-128) of PC2100 RAM to 2
512 Meg sticks of PC2700.
Is this RAM compatible with the Epox8Kha+ motherboard?  If so, would the
upgrade to PC2700 make a significant difference in system speed?

I need to know what to set my sw1: cpu vcore voltage: between 1.475 to
1.850
sw2: cpu ratio selection: between 5-12.5
For my ep-8kta+

About 3mths ago I turned on from cold only to find a twotonesiren noise
yelling at my hangover.I hit the reset button and it disappeared.Today the
siren is back where I hit the reset where it disappeard again,after doing a
google I am led to believe it could be one of three things,

Hi, Gang.
I just upgraded my 8K3A+ to the 8KDA3 yesterday.  Installation went fairly
well, and I'm up and running on it now, with an AMD Athlon 64 3200+ CPU.
I have a question:  The 1 Gb Ethernet LAN is here, and there is an R45

Please read entire post as it is in parts.
Hi All ;
A problem has been detected and windows has been shut down to prevent damage
to you computer.

I've been running my 8KHA+ with a 2400+ cpu and 2 sticks of crucial 256mb
pc2100.  I just bought a kingston 512 mb pc2700 and am having problems
having all the memory recognized.  It seems that i can only get the first 2
dimm slots to recognize anything, as the highest the comp will ...