I have a socket 754 Athlon 64 3400+ (Clawhammer) CPU waiting for a new home.
Does anyone have any thoughts about the 755-A2 motherboard?

just got the above in the mail and no matter what video card or memory i put
in it  it continually posts the processor and memory correctly and then
reboots, reboots , reboots, in a continious loop--have cleared cmos , taken
battery out , removed board from case ---same thing?? ...

PCB rev 1.1 and BIOS 1.1f running XP Professional. 640 MB PC13
SDRAM
I've seen a discussion from early this year about upgrading an
several of these pointers were great such as how to jumper for 50

My PC powers ON when telephone Rings. Any advice on the Bios setting to
configure to stop that?

ECS L4VXA
P-4 socket 478 / 533fsb / 512
512MB PC2700 DD
Thanks so very much for reading.  I have rea

I just got this motherboard and intend to overclock a Sempron 3100+ up to
the max FSB of 250MHz if possible.  I intend to get a single stick of PC4000
RAM for this job.  However, the manual mentions something about only using
up to "dual rank" DIMMs in a socket and if you use a dual ...

My son gave me a Nvidia GE force 5200 video card to install in my other
son's K7SEM motherboard.  Based on the AMI BIOS I believe it is a
version 3.0 C K7SEM.  I have heard that installing the wrong version of
an AGP video card into a motherboard can damage the video card or thge

I have an old ecs ks75a with a universal agp1.0 (2x/4x) slot (3.3v).  Have
been running an old PCI video card.  No problems.  Have an extra Chaintech
GeForce2 MX400 AGP 2.0 video card, (1.5v).  Plug it in and nothing but the
dreaded 8 beeps (computer doesn't boot).  Apparently no ...