I'm the owner of a K7S5A (Rev.1.0) motherboard.I'd want to know if this
motherboard supports USB 2.0 (or the old 1.1) ,I'm not able to understand it
from the Control Panel of my Windows XP SP 2.
Thanks in advance

Hello I bought a 1.8ghz duron, my pc is running a little bet slow. the
believe there are some bios to improve the speed. does anyone know
where i can get them? i believe the problem is with recognzing the
cache.

I had a system given to me today, an ECS L4S5MG3/GX+(5.0) mobo w/2.66
processor, 512mb DDR333 RAM. Unfortunately, it powers down at the beginning
of the POST. I've removed all the cards, unplugged all the drives power,
reseated the DDR ram in the other slot, and reseated the CPU. ...

Hi NG.
I have a KT133A ECS. The mighty K7VZA Rev.3.0.
Is it possible to drive a AMD Athlon XP "Barton" in this MB? If so, as
I heard from other KT133A-Brands that Barton can work, is the whole

i just installed a new mobo (Elitegroup PF21 Extreme) and i got th
BIOS set up to where it boots from the HDD and all, but when i get t
the WinXP boot screen (black, with the little bar in the middle tha
looks like a progress bar) it sits for a few seconds and restarts.

Well after running this mobo with a AMD K7 and 2000 Pro for a couple of
years, I decided to go against my very own rule of "if it's not broke
don't fix it" and "upgrade" to XP Pro SP2. Well, stability seemed fine
at first but then started getting checksum errors so flashed bios and

I have a problem and I don't know where I can find the answer. I wonder if
anyone can help me? I need to know the name of this motherboard and and
which company it comes from.
The only text I can find on the board is IA-P4. It has vga, network, sound,

I am running the following memory sticks in my ECS PVMM2 V 5.a
motheboard:  Ultra 512MB PC3200 DDR 400MHz CL3 . Can anyone tell me if
my motherboard  supports the following CPU: Celeron® D 2.93Ghz
Processor Socket 478 Bus Speed 533MHz and  will I have to buy another

I'm trying to figure out why my system won't shut down or reboot. System is
an ECS NF4-A939 with an Athlon X2 3800+, 1GB dual-channel DDR400, mix of
PATA drives and 1 SATA drive, ATi X550 PCIe, Win2KPro SP4.
Basically when I want to shut down or restart the system does its normal

Has anyone tried to run both SATA and PATA (IDE) hard drives at the same
time on an ECS NFORCE4-A939 motherboard?