I'm trying to get Knoppix 3.2/Debian Linux to wake up and see the
embedded ethernet on the N2U400-a motherboard.
It keeps telling me that it sees no supported ethernet card.
Please tell me what trivial little mistake I'm making with this.

Yep, it's me again. K7S5a rev 3.1
I would lose my CMOS settings anywhere from once or twice a week to maybe
only once a month. It would usually happen after the PC was turned off
overnight (still plugged in to the wall, though).

I have two known good WD scsi hdd (self terminating) that I've moved
from a older system, where they were the boot devices, into a new pc
with the ECS 848P-A mobo. There are no other hdd, but an IDE CDRW. These
two scsi hdd are running off an LSUI160 controller. The controller ...

I want to use a 160GB WD hard drive on my secondary controller.
My K7S5A PRO bios will not see it correctly.
My bios is dated 1/20/2003.
Will updating to the latest bios (8/25/2003) allow

Why does Windows 98SE work with one IDE HD in my system but not two,
even though it's booting from the original HD?
I was running an 80G Seagate Baracudda V and installed an 80G WD HD to
make a backup of it, but it prevented Windows from booting completely,

XP1800 to XP2400, both are 133FSB tbreds.  Dropped from 8241 to 7760.
All four "games" turned in slower results and Lobby (high detail) took the
biggest hit.  Any idea what's going on here?  I'm still running PC133 mem,
BTW.

Problem with L4SMG/651+. A lightning strike.
A friend bought a computer on TV.
When it arrived, they plugged it into a utility power strip and a
phone jack. A lightning strike destroyed the TV and VCR.

Can anybody tell me if elite k7s5a (currently running a duron 1200) can
co-operate with a 2400+ athlon xp? (fsb on mb is 266)
With a 2600+ ?
Thanks in advance

Has anyone used the above combo? Based on the motherboard's
specifications is this Athlon Pro 3100+ CPU a Duron? If this is
correct, how will it's performance be compared to an Athlon XP 2600+
Barton?

As header, I am having problems with a new 40gig maxtor drive.
Intermittent freezes, hard drive pinging, hd led permanently on. Was
wondering if this could be a  bios problem. Ie bios hd limit.  Virus
scan OK. Powermax diagnistic OK except for <bios extension test>

Just thought i'd post a follow up to my problem - originally within the
thread 'K7S5A PRo USB problems' dated 14/5/04.
My pc was crashing with a BSOD more often than not just after boot-up and i
was getting rather fed up trying various fixes and getting nowhere..

   Need help, please.  Version 6.0 (identical to 8.0, as best I can tell):
won't boot with the included, extra 2-USB- port-apparatus connected to mobo.
Unplugged it from the mobo, and it boots fine.
   Any ideas?  Thx, sdlomi2

I have a new K7S5A PRO rev 5.0 with an AMD xp2200 processor and 512 megs
of PC-133 sdram, fresh
install of Win98se, but the USB ports won't function. Drivers installed
properly according to Device

My neighbor wants to buy my Barton, 2500+, 333fsb.  Wants my advice as to
what mobo to buy.  Will the K7VTA3 (version 8, of course) run the Barton
successfully?  TIA, sdlomi2

I have a K7SEM v 1.0 motherboard. The trouble is, that the keyboard
stops working after POST. The keyboard works fine in BIOS, so obviously
the keyboard's fine. But whatever the operating system is (and I've
tried a few from Debian to W2k), the keyboard just doesn't work.