This sweetheart ships for $5.   Not bad.
What would I have to pay for a processor that makes it sing?
Pj

     A friend give me is old ATI rage fury maxx (better than my vid card),
is card running with 3.3v but my board(k7s5a pro) give 1.5v.
Any solution?

i purchased a K7S5A Pro motherboard from newegg.com before christmas
and once i installed it i have had problems shutting it down. when i
tell it to shut down, it turns off and then automatically reboots to
the POST screen and restarts.  i have ACPI enabled in the BIOS and APM

what is the correct FSB for a Barton 2600XP ? 266 or 333?  , how do you know
, or did the Barton only come in a 333 FSB?    thank you   pete rynas

I'm beginning to doubt that I have a sis900 on my system although
I've been networking just fine for 7 months.  The board has the
RTL8201bl chip on it, so why isnt it a realtek adapter?
Pj

Is there a max hard drive size for the k7s5a ?  I'm thinking of getting a
160gb but seem to remember someone saying they had problems.......

OK, I got myself a Ultra ATA 100/133 PCI card, how the hell do I use
it??!!
It was the only one I could find (!) at the computer fair I went to and
it supports RAID as well, whatever that is??!!

  I was wondering if anyone knew for sure if the P6IWP-Fe would support a
Celeron 1.1 (SL5XU). I am getting conflicting information from their
website. If not, or even if so, any suggestions on any better/cheap board to
replace an i810 with on board sound and video? This is planned ...

Which Socket A mobo by ECS is the latest equivilent of the K7S5A? I need
ATA133 & DDR400 but do not need onboard graphics or sound...or LAN come
to think of it.
TIA

Here's the background:
K7S5A v3.1 Duron 1.3G, 384M SDRAM, set at 100/100, BIOS version 3/25/2002,
SiS 315 4X 63M AGP card, CMedia 5.1 Sound Card in slot 5, USB enabled in
BIOS using mouse keyboard printer and scanner on USB, On-board sound and

Just upgraded my cpu from 1500 XP to 2400 XP - motherboard Monitor 5 shows
my CPU running at 52 degrees c after about 30 mins surfing - is this temp
too high???  Any suggestions as to how to lower it?
Just the standard heatsink/fan on the amd 2400xp

When new motherboards come out soon with the new PCI Express slot, how
likely will manufacturers continue to support AGP, in other words will
they offer both the AGP slot as well as PCI express on the same
motherboard?  Perhaps have a BIOS setting as to which slot the

I just installed a 160Gb Samsung SP1604N in my PC, running WinXP Pro.
When I went into CMOS, the mobo seemed to see it, but none of the drive
info (cylinders, etc) appear on the screen when I get the mobo to detect
it. It shows it on boot-up and also in system/device manager in ...

   To use 1.6-1.8 Durons in K7S5A-Pro, which bios should I use--which one
'official' AND which one 'after-market'?
   Have  enabled full- 256 cache on this 1.8.  Anyone having success with
such a combo?  TIA, s.

I just bought a new 256 DIMM and I added it to my existing one (other
brand). The system works OK for a while, but when I play a high-
requiremnt game it reboots. It's done it at least four times now. Any
help?