| Thread | Last Post | Replies |
|
| A8N-E: Convert non-RAID to RAID? | 30 Jul 2009 13:29 GMT | 2 |
I have a machine built around an Asus A8N-E. At present it has two 500GB SATA drives in a non-RAID configuration, and I am thinking about converting it to RAID 5. Will the following procedure work?
|
| Rambus for P4T533-C (Where??) | 30 Jul 2009 03:42 GMT | 6 |
Im kind of in a bind and need to buy some rambus memory within the next couple days. I have an ASUS P4T533-C motherboard with a P4-2.4Ghz processor, Northwood, 533MHz CPU FSB. From what I have read, I have to be real careful about what type of ram i buy for this mobo/cpu combo. ...
|
| P6T Deluxe V2 question | 28 Jul 2009 10:36 GMT | 1 |
I would like buy two of these for my sons and would like to know if the bios has alot of options for them to OC? I was plannning on getting the Core i7 920 D0 stepping. Would they be able to pump it up a bit? Thx
|
| P5E WS Pro - installing SSD to run OS | 28 Jul 2009 07:45 GMT | 2 |
I plan to install a Corsair SSD to replace an existing HDD to run Windows 7 RC 64 bit (and later Windows 7 itself when it is released) plus applications and then have my two existing 500Gb SATA drives mirrored (RAID 1) to protect all my data. This way if there is a drive
|
| P5K & QX9770 | 26 Jul 2009 17:17 GMT | 5 |
Will my P5K work with a qx9770? Will it run full speed with the correct bios? Thx.
 Signature -
|
| what is ASUS' flagship for a Intel Pentium 4 | 26 Jul 2009 12:58 GMT | 2 |
I need recommendations for an ASUS' MOBO. It has to have AGP VID and DIMM 184-pin support I have an Intel Pentium 4 530 Prescott 3.0GHz 1MB L2 Cache LGA 775 Single-Core Processor w/Hyper-Threading Support.
|
| Windows Home Server Mobo? | 25 Jul 2009 08:57 GMT | 1 |
Got a P5Q-SE2 in my WHS box right now, but sometime in the near future I'll probably demote it to use in a family member's PC. My main agenda for the WHS box is to figure out some way for it to go to sleep and wake up on a daily schedule.
|
| HTPC audio with M4A78-VH | 25 Jul 2009 02:17 GMT | 3 |
I set up a HTPC with an Asus M4A78-VH. Everything works perfectly except that I can't get audio output from the audio outs when the HDMI cable is connected to the TV. I was hoping to use the set-up quite a bit for internet radio as well
|
| Asus Extreme Etreme Design Series Motherboards announcement | 25 Jul 2009 01:59 GMT | 7 |
HotHardware.com had this news story today, Sunday. http://hothardware.com/News/Asus-Launches-Xtreme-Design-Series-Motherboards/ The story includes the specs of a P6TD. But I couldn't find this board anywhere on the ASUS site. Is this an accidental leak or
|
| P5B-E: Press Alt+F2 to boot from system recovery? | 25 Jul 2009 00:31 GMT | 5 |
The boot-time messages from the BIOS usually flash by too fast to read, but for some reason I saw this: Press Alt+F2 to boot from system recovery among all the other screen traffic during this morning's boot.
|
| P6T deluxe V2, latency QVL Corsair | 24 Jul 2009 14:51 GMT | 2 |
Need opinion/help deciding on system memory for new build centered on P6T Deluxe V2. I haven't built system in a long time and don't understand Asus QVL list. I want to use Corsair 1600 (PC1280) Cas 7... TR3X6G1600C7 G. However, that memory is not on the QVL list and
|
| Asus Bios problem | 21 Jul 2009 04:00 GMT | 2 |
I tried to upgrade my bios using Asus Update and the upgrade process stopped during the installation. - motherboard P4B533-E - sochet 478
|
| Memory Problem with P5Q Turbo | 19 Jul 2009 02:17 GMT | 4 |
After my Gigabyte motherboard died I replaced it with a P5Q Turbo and everything worked fine. The problem I am fighting is when I try to replace the 2 1GB G.Skill memory modules with 2 2 GB memory modules. With either Corsair or G.Skill memory they will not boot at 1066 speed
|
| A7N8X Deluxe error messages | 17 Jul 2009 21:12 GMT | 17 |
Recently I have been getting the "system failed due to CPU overclocking" message upon boot up of my A7N8X Deluxe system. I have changed no hardware on this system for at least several years. I am running an Athlon XP 2600+ Barton CPU aat 166 X 11.5 (not overclocked),
|
| P5K SATA Raid connector question | 15 Jul 2009 23:43 GMT | 1 |
Can a single hard drive be connected to the "E_2" connector or must it be used for a raid setup? I have an external Seagate 1.5tb drive that diesn't work correctly when connected to the external post so I would like to connect it via an
|