Control Panel>power options>Change plan settings>change advanced power
settings>processor power management>minimum processor state
Hi
I've tried changing the above settings on my pc on numerous occasions,

An unusually high number of drive failures has been reported, causing
Seagate to institute a free data recovery policy for early adopters of the
500GB, 750GB and 1TB drive models.
"A firmware issue has been identified that affects a small number of Seagate

I have this board and currently have 2 320GB SATA drives on a RAID 1 array.
I just ordered 2 new 1TB drives that are SATA2 to make a larger array. I did
read that SATA2 is backwards compatible with SATA boards. HAs anyone used
SATA2 drives with the P4P800 SE boards?

My Striker Extreme came with 1305.BIN and to try to improve overclocking I
eventually got ASUSupdate to downgrade to 1303.BIN.  Although this allowed
me to overclock better it still didn't allow my GTX280 to work with my board
so I tried upgrading to 1801.BIN.  this also failed ...

On this board there are 4 sata sockets
2 of them are for raid and 2 are normal sata
I have loaded the driver for the raid sockets but do I need a different
driver for the other 2 sockets

Sorry for the lamer question..  My first attempt at replacing a CPU.
It doesn't really look that complicated on the Asus P4C800 though.
Understand, that is said just from having gotten the old one out with
relative ease once I figured out how the doggone thing was held in.

If you compare tecnologies from the same generation but different chipsets -
whar chipset type overall uses less energy (preferably for a Core 2 Duo
processor)
TIA

The system does not enter standby - the screen goes blank but all the fans
and lights are stille running and the powerdraw are not noticebky less.
I tried using the Vista standby mode and the AI Nap function.
Neither solves the problem.

I know this information is lurking on the web somewhere.. but having
some difficulty finding it.
I want to know up front if a zalman 7700 cpu cooler, about
4.5" X 4.5" x 2.5" will fit on a socket 478 P4C800 mother board.

I have not been able to find an "ASUS WireLess Router" group, so I pose my
question here, if this is the wrong group, please direct me tothe right one.
I have an "ASUS WireLess Router" WL-500W, I have two issues that I am trying
to correct.  The first one is, is there a way to ...

anyone burn me a cdr of the original driver disc for a couple of quid?
got paypal
someone said asus sell them but cant find on site anywhere?

I sometimes need to disable the internal drives on my machine.
Reason: I also have an Adaptec eSATA Controller installed, which I use to
install "Test systems"
(eg. Windows 7, ...) to external drives and I don't want those systems to

I recently replaced my P5N32-SLI with a Striker Extreme. The P5N had failed,
and the SE seemed to be very similar. It all works OK except when the dram
settings are on auto in the bios, where booting Vista gets a stop 9E error.
I set the tcas from auto to 1 and I can now boot ...

hello every body,
my name wafaa,iam important with computer science,so i did new site
taiking about desktop computer ,laptop computer,artificial
intelligence,neuro-lenguistic programming,and mobile

P5Q SE2, just put it together, but it won't start.
Turn power on, hit Power switch.... Nada.
The little green LED on the mobo is glowing but the power
supply's fan is not on and neither is the CPU fan.