I have an Asus P5B, Vista 32Bit Home Premium.  I have something
connected to the eSATA port.  When the system boots the BIOS sees it
fine.  Vista however, will not recognize it.......everything is proper
in the BIOS, as the BIOS sees it upon boot.

All,
I have a ASUS P5WDG2-WS 975X 775 motherboard with a PSU COOLMAX|
CW-650T 650W RT power supply attached... The computer just died it's
2.5 years old and has been working almost perfectly up to this point.

Hi, on the config panel of my Mother Board Asus there is a flag on
"Disable" Adapter". Have I enable it? Could you give me some info,
please?
Thanks

I have an Asus P5B, Vista 32Bit Home Premium.  I have something
connected to the eSATA port.  When the system boots the BIOS sees it
fine.  Vista however, will not recognize it.......everything is proper
in the BIOS, as the BIOS sees it upon boot.

I'm running -
ASUS A8R32-MVP Deluxe
AMD 64 FX60 Dual Core @ 2.61Gz
2 - ATI 1900 XT's in Crossfire

My cpu is an E8600 Core 2 Duo and the stock fan that comes with it is much
shorter than the fans that are included with the older 2.4 gig dual cores.
Would it be better to use the taller/heavier heatsink and fan? I assume
that the taller units were made for the hotter running core ...

I have a fairly old notebook: Asus L3800C.
The manual says the maximum amount of possible RAM is 1GB (2x512MB). But
I'd like to know whether it's possible to put 2GB in there because I've
read that it's sometimes possible to put more RAM in a notebook than the

I finally got my system humming and want to turn on Raid 1. I do not
want to lose the Data on the first drive.
My question is when I go into The Intel Raid settings, when I turn on
Raid and pick the 2 drives will it not destroy my data on the first

I recently started posting DVD images and had windows xp hibernate
after 5 hours of inactivity when I go back to the PC and wake it up it
my 2nd HDD is no longer visible in my computer.
The 2nd HDD is a IDE drive.

Hello to all.
I just assembled a PC using a ASUS KFNS4-DRE server motherboard.
I am using a pair of AMD 2352 delivered without fan.
The motherboard package contains 2 beautiful full copper heavy heatsinks

I have ocz3g16004gk 2GB modules x 4 (8-8-8-26 and 1.8v), i had trouble
getting most 1600mhz options to work:
Here is a complete list of the timings i've tried so far.. mostly
without success.. the ones i'm listing are for 1600mhz, i figured i'd

The Asus website is down and I am trying to find out if PC-8500
Corsair TwinX will work good in the board.  Anyone know?  TIA.

I have installed a new P5K WS motherboard with a Sunbeam Core-Contact
Freezer cooler. The fan for the cooler is a bit loud (it runs at 2000
rpm); unable to see how to modulate the fan speed, I disconnected it
for a test.  Running BurnIn for 60 minutes with the cooler with the

I think I know the answer already.... but can my P4P800-E accept
one of the new dual-core CPUs?
Just got one of HP's at work and now my home box feels soooo
slow.... -)

I have installed a new copy of WinXP Pro-64-bit SP2 on an ASUS P5K WS mb
and cannot get online to update the operating system.
My LAN is working just fine, with a gateway and DHCO server of
192.168.x.yza and all computers are DHCP-assigned.  When I plug in my