| Thread | Last Post | Replies |
|
| BIOS reports temp of 124 degrees | 31 Jul 2008 13:59 GMT | 8 |
I have an ASUS PG5GD1-VM mobo. When I reboot it I get a warning that the CPU is too hot, press F1 to proceed. In the BIOS, the temperture is reported as 123.5 degrees. I've installed SpeedFan (http:// www.almico.com/speedfan.php), and it also reports the same
|
| Shouldn't the Wifi @n have a router address | 31 Jul 2008 09:28 GMT | 1 |
or would the number possibly be internal. First, sorry cause this is sort of a double post only it's better communicated, imho. I can see the network, but I know with my linksys router i can contact that with it's ip of 192.x. x something . Only here it is not the
|
| A7N8X Deluxe funny behavior | 30 Jul 2008 19:56 GMT | 2 |
When I allow my A7N8X-deluxe computer running XP home SP2, to hibernate (with no programs running) after whatever time period I have set in the hibernate settings, I can bring it out of hibernation by just hitting the 'enter' key (USB keyboard).
|
| fans turn on then off | 30 Jul 2008 10:38 GMT | 12 |
I built the PC myself, yet it does not boot. When I press the Power On switch, the fans turn on for about a second, then they turn off automatically. I checked the standoffs. I remove the motherboard from the case. I disconnected all drives, and the video card. I
|
| P5E High Pitch Tone at startup | 29 Jul 2008 20:22 GMT | 2 |
I took apart my computer to try out a new modular power supply. I attached all the wires and turned it on and I now hear a high pitch constant tone from the internal speaker on the motherboard and the computer won't boot. I have put back in the old power supply and I
|
| PC3200 Memory Question | 29 Jul 2008 15:48 GMT | 1 |
I have a P4C800 Deluxe My question is: I have 4 X 1 GIG DDR just installed (all sticks identical) CPUZ says I have 4+ Gig of DDR installed. Belarc says all DDR slots are filled with 1024 meg
|
| Any new Asus boards that support ECC? | 29 Jul 2008 02:16 GMT | 14 |
I see the newer models don't support ECC memory. Are there any new Core 2 Asus boards that have ECC?
|
| CPU too hot on boot up | 27 Jul 2008 15:07 GMT | 10 |
I have a quad core (9450) on a P5E3. PC Probe shows a big spike on the CPU temp after booting up. It's drops pretty quickly though. Stll it's booting up around 70 degrees centigrade and then drops down to about 30 just idling. Not sure why it runs so hot.
|
| Bios for P5W DH Deluxe | 27 Jul 2008 03:09 GMT | 6 |
Hello, All! What is the preferred, stable bios for the board (using a E6750 CPU)? Thanks, Colonel Blip
|
| Motherboard Phenom and DDR2-1066 | 26 Jul 2008 17:05 GMT | 2 |
I have an M2N32-SLI Deluxe motherboard and I think it is time to get a new motherboard. What I am looking for is a motherboard with the features of the M2N32-SLI Deluxe motherboard but reallly supports the Phenom and DDR2-1066 memory. I have been trying to find an Asus
|
| How to diagnose a dead PS? | 25 Jul 2008 17:46 GMT | 18 |
I have what I think is a dead power supply. There are no lights or any sign of activity anymore. Normally there is a ASUS P5E MB LED on even when the PS if off. No response to the power button at all. Completely inert. No fans, no lights, no nothing.
|
| p4p800 - runs but crashes on install windows from CD? | 25 Jul 2008 13:48 GMT | 2 |
Short version of the story: Doing a major mobo swap so I was trying to do a repair install. New config is P4P800, no cards except ATI 9800 video, standard IDE drives, couple IDE CD ROM's, couple gb memory. I put the winXP CD in the drive, booted and got the "press any key to
|
| Slightly OT: AGP cards dies... mobo to blame? | 24 Jul 2008 16:30 GMT | 3 |
This is actually a gigabyte mobo, but I think the question is general enough to get some quality opinions here. Gigabyte 478 mobo with ATi 1300 AGP 8x. System goes dark a couple times over a couple days (no video). Reboot... work OK. Then it
|
| Trouble Booting With External USB Drive | 22 Jul 2008 16:08 GMT | 1 |
I picked up a Seagate FreeAgent external hard drive Friday and am having problems booting with it connected. The drive works fine if I connect it after Windows has loaded but if I leave if connected while booting the computer "hangs". Most of the time when it gets to the step ...
|
| Qualified Vendor List, memory for M2N-E | 21 Jul 2008 23:42 GMT | 1 |
Where is the QVL on the Asus Web page? I'm thinking about using Corsair DDR2 TwinX 800, either 4 1GB modules (e.g., CM2X1024-6400) or 2 2GB modules of same specs. Any comments?
|