WIndows XP cannot find a driver for this, I just purchased a logitech
easycall keyboard/mouse combo and they connect via the main hub/
speaker device..
When this is plugged into another computer, all the HID devices are

My mic input on my A7N8X stopped working and I reloaded the driver
many times but no luck.  I know this MB is old but it works great with
a  AMD 2500 cpu.
I wonder if anyone else has run across this problem.

I've upgraded to a new Intel Core 2 Duo processor from a Pentium 4 and noticed
that my hard disk drive erase time increased dramatically.
My 500Gb drive took approximately 2 hours to erase before the switch, now
it takes 5 hours. This is with a program called Killdisk.

I would like a motherboard and the fastest AMD chip that would
work in my full size ATX case and also be able to use the
three sticks of Kingston PC3200 1gb. If the board supports
and AGP videocard that would be great.  Anybody have ideas

I have an A8N-E motherboard with the latest BIOS (1013, IIRC); it claims
to have onboard SATA capable of 3.0GB/sec. I recently added a Seagate
SATA drive that also claims to be capable of 3.0GB/sec., but in
WinXP+SP2 Hardware Manager the only available transfer modes are 1.5G

I upgraded from 2GB to 4GB of DDR2-5300 and the SATA drives
disappeared! It's totally weird
since the the POST memory check finds no errors and the RHEL4 boot
image is loaded into

Is there a esata board that will work on this board? I bought a Promise TX
4302 and it does not work. I have since read where others have tried this
combination and it gets an errot code 10. Promise ts only says "we have not
tested it on that motherboard."  I am currently running ...

looking on crucials site
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=155D68ABA5CA7304
i see if i only have ddr333 instead of 400 i can have 3gb of ram.  but if
ddr400 i can only have 2gb.  as only two banks will work.

Motherboard: Asus M2N-E (chipset: nForce 570 Ultra)
Harddisk: 2 x 250G Seagate in RAID 0 formation
The Installation process would reboot during the last phrase (Completing
Installation). Files were copied successfully into the Vi$ta partition.

I'm going to try it with the wake on PCI enabled,
next; but I would think there has to be an easier
way to get this to function with the on board NIC.
The A8N-E is in a Sonata II with a Smart Power 2.0

My current setup is as follows ...
Asus A7V133 [rev 1.05. (with dot)] with VIA 4in1 driver v4.43
AMD Athlon XP 1600+
AGP Slot: Video - 128MB ATI Radeon 9800 Pro

I'm now on :
MB: A8N-SLI DELUXE
CPU: AMD Dual Core Opteron 180
Cpu Socket: Socket 939

The southbridge of my mainboard (asus P5VD2-VM) is an via 8237A and the
driver V-RAID_V560A of via don't works (hardware not detecte).
Actually I work with windows vista 64bits pro.
Anymore help?

Using an Asus A8N SLI Deluxe MB.
I currently have two sticks of Corsair CMX1024-3200C2 on board (1024k each,
200mhz, ddr).
I tried finding the same type on NCIX.com so I could fill the remaining two

I have a Dell pc with plenty of usb ports, but the four on the front panel
don't work - they have power, but don't seem to have a data connection.
I've had the machine from new (about 18 months old I think) but only noticed
the problem after the warranty expired.