| Thread | Last Post | Replies |
|
| Asus P4P800 and Prescott 3,4 issues | 31 Jul 2007 19:55 GMT | 5 |
Has somebody tried it or has the Prescott 3,4 Ghz (D0 stepping) with this mainboard working properly? In my case it's a matter of luck if the system will post when the Prescott has been istalled (my 3,06 ghz Northwood works fine). The memory (Infineon 2x512 mb) is ok (tested with ...
|
| Anyone try P5W DH Deluxe/BIOS 2205 Beta/E6X50 Combo | 31 Jul 2007 06:13 GMT | 6 |
Has anyone run one of the ASUS 975X based MBs with a E6X50 CPU at 1333 FSB using the latest BIOSes? Thanks, Don
|
| Almost there, but confused about SATA selection in BIOS | 30 Jul 2007 05:59 GMT | 6 |
Success!! I double checked all connections and finally powered up. It went right into the BIOS. It's alive! Temperatures seem to hover at around 118-125 degrees F. The only problem I had was a noisy fan, which was screwed to the case but when I relocated it, the noise was
|
| P4P800 and 4GB RAM? | 29 Jul 2007 17:06 GMT | 2 |
I am running Windows Server 2003 with an AGP video card. I have two pairs of Samsung non-ECC, non-Registered dimms, all 1GB PC3200. One pair has Samsung K4H5108388 B3 chips, the other pair has K4H5108380 UCCC chips.
|
| how to isolate raid corruption | 29 Jul 2007 06:24 GMT | 9 |
At the risk of starting a long thread, I need help troubleshooting my Pc' raid corruption problem. apparently my PC with Asus K8n-vm csm gives that hassle of corrupted raid. I heard it can be BIOS, driver, mainboard, PSU, RAM, even hard drive, ...
|
| HD replace IDE -> SATA | 29 Jul 2007 01:47 GMT | 3 |
As noted in a question in alt.comp. hardware.pc-homebuilt, IF I have to replace my HD, how do I g about it?? (HD about to quit?) So far it works.... My MB is an Asus A8n-VM, and as of now (or a week up), I haven't used SATA
|
| Asus M2A-VM audio problem | 29 Jul 2007 01:06 GMT | 2 |
I have an unusual problem and can't figure it out. First a little about my computer: Asus M2A-VM Motherboard ADM Athlon 64X2 6000+
|
| RAID-0 data loss | 28 Jul 2007 21:44 GMT | 1 |
I've faced to a RAID-0 data loss. It's a Hardware RAID-0 (strip set) on 2 SATA Hard Disks. The problem occured when one of my colleague reinitialized (quick initialize) the RAID group. - RAID controller is a Promise Technology product and is called
|
| P5WDH internal sound win xp comparing to vista | 27 Jul 2007 18:18 GMT | 2 |
Dear Reader, when using ap5WdH deluxe based system with vista as os the internal sound system works quite well meaning hearing no additional noise. When using the same system with win xp i can hear a lot of low or high
|
| P5GDC-V Deluxe build | 27 Jul 2007 18:00 GMT | 15 |
Hi. Just joined this group because I need some help. I have a P5GDC-V Deluxe (sat in garage for about two years until last week) I just got my order from Newegg:
|
| Network chip not detected A8N-32 SLi | 26 Jul 2007 12:33 GMT | 6 |
Removed nvidia firewall and some other nvidia/asus drivers. One of the network chips now not detected ? Bye, Skybuck.
|
| P5K-E as a HDTV server | 25 Jul 2007 14:58 GMT | 2 |
I just bought a P5K-E motherboard to use as a media server along with the OnAir HDTV USB device. Has anyone packed this MB in a smallish footprint case without burning it up? It's got a heat pipe for the support chip that "exits" near the I/O
|
| K8N-LR | 25 Jul 2007 01:41 GMT | 4 |
Does anyone know how to unlock the CPU setting in the BIOS? In the Advanced CPU configuration everything is there but nothing is highlited. You can not adjust. The only two things adjustable from that menu are GART error Reporting and MTRR Mapping. I have the latest BIOS from ...
|
| P5K @ 1066 MHz | 23 Jul 2007 22:27 GMT | 1 |
I am running the P5K. My memory modules are of type Kingston KHX8500D2K2, supports 1066 MHz. When starting the pc, the POST reports DD2 at 800 MHz in Dual Channel interleaved mode. Sandra also reports that my MMs are of type PC6400
|
| PC Speaker wrongly connected: Battlefield 2 sound issue's gone ?!! | 23 Jul 2007 21:36 GMT | 10 |
Since I rebuild my PC I also reconnected the PC speaker connector wrongfully as well as the power led and hd led wrongfully. I can't remember having any Battlefield 2 sound issue's since then. I read somewhere else about disconnecting the PC Speaker solving sound
|