Hi, I have just come across this problem on my mobo, it's a Foxcomm
sis-661, Celeron-D 2.80GHz and a ENLight EN-83072V4 psu.
My question is, would this be a psu problem or a mobo problem, ie
which should I replace?

Which memory should I buy?  I really don't overclock just want good
memory for a good price.
ADATA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820211014

I looked through several hundred old posts, didn't see anything to help.
I have the a8n sli delux, phoenix bios v 1004, and I put a dual core
4400 in it.  Ran just fine, but does not show up as a dual core.
I need to update the bios, but for most of them I need to update the

Long story short...and I'll try to keep my observations to the relevant
details...I've already wasted close to 10 hours on this, blaming hardware
that, it turns out, wasn't at fault at all...
I have an A8N-E board with 6 hard drives (4 SATA + 2 IDE), plus 2 IDE

I was thinking of ordering a P5W DH board and a couple of Kingston
HyperX 2gig memory kits (in anticipation of a Vista upgrade - I
realize it will only see about 3.2 gigs of the memory).  The kits I
had in mind were the KHX3200AK2/2G ones that list a CAS of 2 and

I have bought a barebone with a P4P800-M in it. I think it was built for or
by Haier, but that company doesn't seem to exists anymore. Now I want to
upgrade the bios, because I have some stability-issues and its version
v1.001 or so.. But the mainbord doesn't seem to exist on the ...

I seem to have a hard drive going bad.  Currently use two IDE drives and was
wondering how well the A7n8x Deluxe does in mixing SATA and IDE drives.
Anyone with experience doing this?

I have an Asus a7n8x-x with 2 512 pc2700 corsair chips in it.  The board has
a max of 3gb.  I want to keep the existing chips and add a 1gb chip to it to
max at 2gb.  Can I mix 2700 and 3200 memory?  I can only find 2700 in 512
but I found 3200 in 1gb chips.

I built a comp using an Asus P5B-Deluxe.  I'm using two 1GB moduled of
SuperTalent memory.  I was skeptical of the brand, but looked around
and found several favorable reviews on line so I got it.  Anyway, with
both modules installed, my machine reports only one GB of RAM.  With

I'm running Vista x64 ultimate. It is not detecting when a headset is
plugged into the front audio headset jack. The motherboard is mounted in an
Antec P180-B case with the front audio connected to the motherboard.
The firmware is at 0504. I checked the front HDaudio settings in ...

Built this system P4C800DLX, P4-2.6C, 250GB Seagate SATA, 1GB RAM, XP Pro in
2003, Antec Case and flawless performance since.  Just this week I've had 3
unexpected reboots.  No BSoD just goes black and reboots fine.  Almost as if
the power fluctuated but my house electricals seem ...

What is the highest or the fastest CPU the P5B-VM can handle?  Thanks.

Does this motherboard support SATA out of the box? Or do I have to
push the F6 key during install of Windows XP and install some (any?)
drivers at this time?? I'm not going to be setting up any RAID
configurations or anything like that. Just plain ole simple SATA

Now that I have my memory problem solved, (I was sold 2x512mb  instead
of 2x1000mb)  I have to go back to the store and get either a refund
or a replacement.  I called and the guy says he will replace the
SuperTalent PC1000 I got with Kingston HyperX PC800.  I'm not a gamer,

Well, I don't feel so dumb anymore.  Apparently,
nobody in this news group knows anything about
the ASUS RAID 1 operation either.