| Thread | Last Post | Replies |
|
| Asus P4S8X with Gigabyte GV-N68128DH hangs | 21 Jul 2006 21:30 GMT | 3 |
I installed a AGP 8x graphics card (Gigabyte GV-N68128DH, gforce 6800) in my Asus P4S8X mainboard. The system starts but freezes at the PCI device listing (before an OS/floppy boot is possible).
|
| ASUS MB P4P800 | 21 Jul 2006 14:52 GMT | 1 |
Since 2 days I get the P4p800 ASUS MB Logo come on and it stays on for a long time (more than 1 minute). I never had this before, when my WINXP PRO computer would boot right into Windows Welcome and then the desktop.
|
| A8N-E and Norton Ghost 10 | 21 Jul 2006 06:15 GMT | 2 |
I had Norton Ghost 9 and just upgraded to 10. Now the v10 CD won't boot on my A8N-E computer with SATA II drives. However v9 boots just fine. What gives? Is it my SATA drives, or a motherboard issue? I have tried booting from the same v10 CD on other machines, and they will boot ...
|
| Intel Core 2 Duo E6300 + ASUS P5W DH Deluxe | 21 Jul 2006 04:07 GMT | 2 |
Impressive! http://www.xbitlabs.com/articles/cpu/display/core2duo-e6300.html
|
| A8N SLI SE and Seagate 320 gig drive | 21 Jul 2006 00:00 GMT | 4 |
I am putting together a new computer for a friend based on an Asus A8N SLI SE motherboard with AMD 3500+ CPU and a Seagate 320 gig PATA hard drive. Hassle is the system (with XP) sees the drive as a 127 gig drive. Ideas anyone?
|
| Maxtor 160 Gb on A7A266 motherboard | 20 Jul 2006 18:00 GMT | 6 |
I am going crazy to fit a 6L160P0 HDD on my (not so)old motherboard: is there anybody that knows how to do ? Note that I already uodated the BIOS to version 1012... Thanks.
|
| switch IDE to AHCI with Windows XP? | 20 Jul 2006 01:52 GMT | 10 |
Hi, wondering if anyone knows: I want to tell my BIOS to run my SATA hard drive in AHCI mode instead of Standard IDE mode. But when I do that, Windows XP no longer boots up (it spontaneously reboots instead).
|
| board doesn't power up, no beep, no boot | 19 Jul 2006 23:38 GMT | 4 |
Hi all , IŽm try in to build a pc with a asus P4p800x board and a celeron 2.8 , but the board doesn't power up, no beep ... just nothing ... The board led is ok(is on) , when i power up all fans start to work
|
| ASUS P5GDC deluxe | 19 Jul 2006 20:03 GMT | 2 |
I made a major mistake, buying a computer from an engineer for a price you would not pay in any store. Ofcourse I got a major heap of not-working crap.... I wanted something special with lots of hard-drives. So I got an ASUS
|
| P5WD2 Premium and New DUO CORE? | 19 Jul 2006 14:08 GMT | 10 |
Will my P5WD2 Premium 955 chipset Motherboard work with the upcoming DUO Core Chips being released in a few weeks? Also, on my current rig, I have a Extreme edition processor (Chip costs over $1,000)
|
| SM Bus on a P4C800-E Deluxe | 19 Jul 2006 13:23 GMT | 5 |
Hi, Is there a driver or something that controls the SM bus that can be updated or downgraded? With all the P4C800-E Deluxe motherboards, along with Antec power
|
| A7V333 - ATA and RAID act differently w 200GB drive | 19 Jul 2006 09:14 GMT | 2 |
A7V333 w BIOS ver. 1017 = Award 6.0 7/25/02 Win98SE, Asus MB utilities and drivers installed 200 GB Seagate ATA drive, 110 GB (F:) and 90 GB (G:) FAT32 partitions Partitioned and formatted w PM8
|
| a8v-mx and cpu fan control | 18 Jul 2006 22:55 GMT | 1 |
Does anyone know what the deal with these fans are? I mean, it seems that all the fans that come with h/s seem to respond to the bios signal (pwm i think). I want to use a 12cm cm via a converter and all the case fans i've tried of
|
| The differences? | 18 Jul 2006 21:15 GMT | 3 |
Hey all, What's the differences between the P5B and P5B Deluxe? I'm confused over which to go for y'see. Anyone know of any comparisons or can tell me the main differences?
|
| ASUS P4C800-E Deluxe and Seagate SATA 3.0 Gb/s | 18 Jul 2006 11:58 GMT | 4 |
My current IBM hard drive is going south after years of serving me well. I ordered a Seagate SATA 3.0 Gb/s as a replacement. I realize the ASUS P4C800 only supports SATA 1.5 Gb/s and the Seagate will ship with a jumper set to 1.5 Gb/s. I figured I'd purchase this drive as I'll be ...
|