I'm an old hat at overclocking, but mostly I browse the forums only
when I need some specific info. This is one of those times. I've
built 10-15 computers of my own, the last being an AMD Athlon64 3200+
which is still rockin' hard after a year and a half. Previous to that,

Sorry for my bad english..:)
I have one little problem.
My new pc with the P5WD2 Premium mainboards, sometimes (probably all
times, for now i not cheked) when i power-on the system not start and

Does anyone have a P4P800-SE mobo with "S3+" ram ?
Does it works ok ?
If not did you was able to solve the problem (maybe without changing the
ram...)

i would like to know when this bios (28/12/2005) be available with ASUS
Update Utility ?
actually only available in dos mode !
tia

I've just assembled a computer using this MB. Primary boot drive is a SATA
on the Intel SATA controller running in AHCI mode (an exciting project in
it's own right!). I have a DVD burner in the Intel Ultra ATA controller.
BIOS version is the latest 0302. No RAID is configured on ...

How to get enable 4x agp mode on this mobo with ATi Fire GL4 ?
I try new 4-1 via driver and it didnt help.
Greetings
Adam

Nvidia just came out with the new Nforce 4 drivers. Now the documentation
says I need to delete "nvidia display drivers", or "Nvidia windows drivers"
from my installed programs list. The only thing I have is called "Nvidia
Drivers" - is this the same thing, or should I leave this ...

Where do I find this? My old links are obsolete.
Thanks

If I run a P3B-F with a 667-256-133 bus CPU (cheap slocket in place
now running a 400) do I have to worry about the 133 speed overclocking
the rest of the board or can I jumper to accommodate that?  I noticed
that the mobo manual has settings for 133 but has a warning about

I've had my system about 2 years and everything has worked fine until
a couple of months ago. At that time, I added a new DVD burner, BenQ
DW1640. When I tried booting, the computer started to boot as the
power lights on both my DVD drives alternately came on and then it was

I have a stone age CUSL-2, P3 768mhz. 512meg memory (a 256 and 2 128's),
with an ATI Radeon 7500 AGP video card and a modem, nothing much else. My
power supply is rated at "170w output " (300w PS) but the fan is very noisy,
and I want to replace the PS, cheaply.

I am new to this group and I hope to be wellcome.
I have an ASUS-A7V8X-X board, an AMD Athlon-XP 2800+ cpu
and 2x512MB RAM PC3200.
In the Advanced screen of the BIOS I can set the frequency to

I just installed a new ASUS P4S800D-X motherboard and I am
experiencing some problems with the memory which are affecting boot
ability of the machine.
I have two 512MB 400MHz DDR Ram chips and one 1GB 400MHz chip

Hello, I have a PC with  ASUS A7V600-X mobo. Wondering if Geforce
6600GT series graphics card is about to work perfectly without any
known glitches like with Radeon 9600 XT? Or is the VIA chipset
troublesome in any cases?

I just put together a system for a friend using an Asrock 939Dual-SATA2
Socket 939 motherboard
(http://www.newegg.com/Product/Product.asp?Item=N82E16813157081), 1 GB
dual-channel memory, an Athlon 64 3200+, a Maxtor 200GB SATA150 hard disk