What's the highest speed CPU anyone is running with this board? I know 2.6 is possible , anyone runing a higher speed one?

My system is 5 years old running at 500 mhz.  Most of my computing
uses are not-cutting-edge games, Internet, a little word processing.  
It's time to update so I'm considering using my existing 500w case,
monitor, kb, mouse, cd drive and floppy and putting in something like

So what's up with Asus' web site? It's garbage slow... so slow as to be
useless.  It's been that way for the last week or so. I'm averaging about
8-11 Kbps!  Good god... it's maddening!

There are some authoritative folks on the Corsair forum stating that
there are two kinds of Venice-core Athlon 64s -- Rev E3 and Rev E6.
They are further stating that the A8N-SLI Premium, perhaps the entire
A8N line, is not certified compatible with Rev E3 chips and that if

I have a strange problem with my computer.
Sometimes when I switch it on, power comes on, the disks whirr but
nothing at all happens, no image on the monitor.
Then after a few attempts it boots up, but it goes into a self-test

Hi.  I'm looking to go AMD64/PCIe very soon, and among the boards I
looking at are the A8N-SLI, A8N-SLI Deluxe, A8N-SLI Premium, and the
A8N-E.  In terms of feature set alone, the A8N-E is really sufficient; but
I'm considering the others because I can afford them, and maybe I'll ...

Could somebody please help me! I want to replace the old PSU with a
new one but I am not sure if the new PSU has to have a negative 5 Volt
supply???
I was going to get an ENERMAX 420W Noisetaker ATX2.0 PSU (any

I was wondering if it's possible to explicitly disable ACPI in the BIOS
on the A7A266?  I can't find a specific setting for this in the BIOS.
Thanks,
Jim

Hi, I've had my box
Intel Pentium 4HT, 2400 MHz (3 x 800)
Asus P4C800 Deluxe
Intel Canterwood i875P Chipset

Basically what's happening is is the power light is lighting up on the
board itself but the machine does not power up.....
1) I had this board working in another tower. Switched it to an
identical tower and touched NO jumper pins, left alone.

I've developed a problem with my homebuilt system the past 3 days
that is driving me nuts trying to figure it out. Until recently, everything
HAD been working  fine ....
The system is a K8V (non deluxe) motherboard, with an AMD 3400 64

I recently purchased memory for this new system I am building and would like
to know if I am installing the correct module or will I have some problems.
I have one stick of "Dram Master" 1GB PC3200 DDR400.  There appear to be 8
chips on each side. Stamped on each chip is Samsung ...

Is is possible to use dual monitor on this motherboard?
Primary Display= AGP Slot
Secondary Display= PCI Slot
TIA

After installing Norton System Works on an XP machine with a ASUS SLI32
motherboard runnning Nvidia Firwall, my outlook express gave an error when
trying to get mail.  The only way to fix it was to turn the firewall off and
reboot.

Need some advice on what type of AMD dual core CPU and memory to go with
my motherboard.  I am not a gamer.  This will be primarily used for website
design, citrix applications and related business stuff.
Any additional suggestions on what type of display adapter (include