| Thread | Last Post | Replies |
|
| ASRock 939 Dual SATAII Sync CPU and PCI-E? | 30 Nov 2005 23:41 GMT | 1 |
My asrock has the option in bios the Async or Sync the cpu and PCI-e. What in tarnation does that do? This is not a bad board, but some options are not clear. Anybody out there running one?
|
| P5WDG2-WS | 30 Nov 2005 16:14 GMT | 1 |
Any news when this will be out in the uk and how much ? Cheers
|
| S-ATA problem | 30 Nov 2005 16:08 GMT | 3 |
After years owning Abut boards i took a leap into the unknown and bought an Asus P5GD1 board. The problem i have is nto so much a problem but an annoyance in that my two S-ATA drives are only being used in mode 5 (ATA-100) instead of
|
| What is ATK0110 ACPI UTILITY? | 30 Nov 2005 07:38 GMT | 5 |
After installing Windows, it it requests the above utility. repeatedly, even if I check the "Do not ask me again" button. I could not find the *.sys file on my AN8-E CD. After searching the Web, I found that it was
|
| P5GD2: System starts on its own. | 30 Nov 2005 03:59 GMT | 1 |
P5GD2 Deluxe. Choose shutdown from XP and it seems to totally shutdown. Then, 4 sec. later it turns itself back on! I unplugged the network cable and problem was solved. But BIOS item "Power On by PCI device" is DISABLED (as are the other items in APM Configuration).
|
| Is it ok to install A8N-SLI Premium upside down? | 30 Nov 2005 02:50 GMT | 4 |
Many new cases are reverse ATX and the mainboard gets rotated to where the CPU is at the bottom of the case. I also know that the heat pipe on the A8N-SLI will not function optimally in this orientation. However I see this being a lot, even Maximum PC has a system being auctioned ...
|
| P5WD2 and cannot install HD Audio | 29 Nov 2005 23:55 GMT | 1 |
I'm trying to install HD Audio on P5WD2 and can't do it. 1) I got unknown device (described as PCI device) but I think it is Realtek HD. 2) I run setup from Asus CD and it works ,then says to reboot PC.
|
| What Motherboard will work with P4 2.4 | 29 Nov 2005 23:10 GMT | 1 |
I am ready to change my mobo (no boot up) but I would like to keep the cpu P4 2.4ghz and the memory 4 X 256 3200 DDR. what motherboard do you recommand? Thank you.
|
| Windows can't see my drives on my P5AD2-E Premium... | 29 Nov 2005 21:57 GMT | 1 |
I previously had a Windows XP installation, with the hack published on Tom's hardware to make software RAID5 available in XP. I therefore had 1 SATA drive as the XP drive, and 4 other SATA drives in RAID5, connected to the Silicon Image controller.
|
| a7v600-x stuck in reboot loop? | 29 Nov 2005 21:14 GMT | 10 |
i have a friends pc with an a7v600-x m/b and when it turns on it initially goes straight to the bios screen which says the cpu speed was incorrect at last power on and then when i save and exit the bios it loops around after the post screen back to resetting and starting again ...
|
| Does A8N-SLI Deluxe have Raid 5 online expansion? | 29 Nov 2005 20:27 GMT | 6 |
I'm considering getting the A8N-SLI Deluxe mobo with a dual core Athlon 64 X2. I've read some articles which indicate the onboard Raid 5 performance is somewhat lacking, but i'd like to try it out anyways before investing in a dedicated Raid5 card.
|
| A8N Premium is SATA II? | 29 Nov 2005 19:13 GMT | 1 |
I think I read the specs right, but don't see a driver for the SATA II on the installation CD? Or is it included in the SATA driver section???
|
| P4P800 deluxe Problem boot | 29 Nov 2005 19:05 GMT | 2 |
MOTHERBOARD: P4P800 deluxe P4P81104 CPU: P4 2.40 GHZ MEMORY: 4*256 DDR 400 BIOS: was 1019 but now 1021 08.00.09 (P4P81106)
|
| SATA drivers | 29 Nov 2005 15:08 GMT | 7 |
How can I instal the drivers for SATA when there's no a:drive on my computer. During the WXP instal setup ask for pushing F6 to instal the non-microsoft (SCSI) drivers for the SATA on the A8N5X. I have to put these files on an ancient 3,5 inch floppy, they ask!
|
| Herky jerky mouse | 29 Nov 2005 14:14 GMT | 2 |
ASUS P5lD2 The PS2 mouse is not responding very well. Jumps and jerks and you try to move it around. Have to click 4 or 5 times in order for Windows to 'catch' the click command.
|