My P4 3.4 (650) seems to be running a temperature: 54C idle to 67C at
100% utilization, according to ASUS PC Probe II. No over-clocking,
staright fans (no Q-fan, that just didn't work well at all). I've read
that software varies on its reporting accuracy, but it just seems to

does this board or AMD-CPU support already 2 GByte memory modules? To
go for 4/8 GBytes of system memory.
Hp

I found this:
http://www.rojakpot.com/default.aspx?location=3&var1=130&var2=0
after seeing something called PEG Link Mode in my BIOS. Since I didn’t
know what it was and why my X700 Pro gave me "failed VGA test"

Does the above boards promise controller support Native Command Queuing
(NCQ) or would I need to purchase a separate controller to have that
feature?
Thanks,

I bought the Asus P4PE motherboard and added the V9180VS video graphics
card a couple of years ago.  My video drivers are current.  My system
is now having difficulties that make me think I may have inadequate
video RAM.  I've got adequate system RAM -- I have 1 GB and I'm running

Anybody seen/heard any reviews/comments/etc.. on this board?
If/when building new machine, might this be something for it, at 89eur?
Rest would be:
AMD Athlon64 3000 (Venice) box            152eur

I just purchased an Asus P5WD2 Premium motherboard.
I have a SATA drive, and an IDE Sony DRU-710A DVD Burner.
Problem is when i go into the BIOS, it does not detect the DVD Burner.
Funny thing is if I go into the BOOT menu it shows the DVD Burner as a

Hey, just opened a customer's box..Looks like one of the retention clips for
a p4p800s s478 heatsink broke off.
The 3.0ghz CPU apparently has been running at 80C for a while now as the one
corner was up high.

I cannot get my new SATA drive to boot.  Here's what I've done:
I flashed the motherboard BIOS.
I used ghost to copy the old IDE drive to my new SATA drive, including
MBR.

I've just encountered a serious motherboard failure. :(
When I power on my computer, it seems to be starting to boot, but then
just halts. I don't even get any display on my monitor, so I really
don't see what's happening. I have tried to put in the recovery CD with

I have tried to use an EE 3.73GHz HT 1066 (04b) in a P5P800. Asus says
that bios 1011 is needed for 04b type CPU.
Obviously there is an other (lower version) BIOS installed.
Sometimes it beeps (prolonged) and then nothing. Tried to connect a PCI

My CPU, S478 P4 3.2GHz Prescott, has suddenly and quite abruptly started
having apparent overheating problems.
It's hovered around 40-45C in the past but recently the case took a heavy
knock (don't ask) and ever since, well the last two days, I've noticed the

onl noticed this problem since it started to get cooler here, when i
switch mty comp on in the morning everything gets power apart from the
light on the 3d card flciks on and then off straight away and the
monitor doesnt come on.

Since I connected the speaker connector on the board properly (need glasses
;)  I am getting 2 beeps during post and 1 beep when the bios is complete.
Is 3 beeps normal and if not is there a page where I can find out what they
mean?

So I've got an ASUS P5S800-VM board with the integrated 661FX graphics, connected to a
Samtron 72V TFT monitor, capable of 1280x1024@75Hz.  However, I don't seem to be able to
set a graphics rate higher than 1024x768 even though they are listed as available.  If I
do, it sets it as ...