I have so much problems with my A8V Deluxe. Now I think the graphiccard is
the problem. I have running a ATI Radeon 9250.
My question now, is it better to run a graphiccard with Nvidia-chipset?
Thank for answers and sorry for my bad english.

I looking at getting 2 sticks of 1G memory for an A8N-SLI. Generally
speaking, are Micron/Samsung modules considered cheap, or of inferior
quality? I know that there are more expensive, highly regarded modules,
but I was wondering if there was any reason to avoid these two

Im in the process of upgrading to a system based on the A8N-SLI Premium
which will be a costly but worthwhile exercise.
I'll be a bit cash strapped for a while and will have to make do with an old
PCI card Ive got laying around.

I am so desparate - I'll try anything.
I just bought the A8v and everthing installs perfectly until I install
the video drivers.  As soon as I install the drivers the system goes
into standby.  As soon as it boots up, it goes into standby.  I can't

I'm new at this and wanted to know the best way I should configure a new
system.
My Lian Li pc 60 case has three fans, front, back and blow hole.  The ASUS
A8N SLI Premium has the CPU fan.  I'm planning to use a Lian Li TR-3

Here is a problem that solved itself.  I thought I would share it with
the group because it is a "good news story," as a contrast to all the
tales of woe that fill these groups.
I was building up a new system using an ASUS board.  Antec power

I noticed that my memory wasn't running at full speed and thought I
would speed it up in the BIOS.  Shouldn't of attempted it when home
from work, tired and kids about, but I did.  Anyway I think I increased
the FSB to 200MHz (I have Athlon XP 2800)and so when I tried to boot

I have somehow misplaced the driver disc for my P5P800.
Yes, I am aware that drivers are available from the Asus site
I would prefer to have the CD-ROM
My normal help sources did not come through this time and Asus can't seem to find the time

I have an A8V-Deluxe.  I set up the Promise controller for IDE mode
(set in BIOS).  I installed the IDE driver (not the raid one) for the
Promise controller, it loads.  However, it immediately comes up
detecting another device called the "Promise SCSI controller

this is my first post in this forum.
I bought this mainboard with my computer a few days ago. I will use
this PC as a server.
However I get a CPU fan error while I  boot up the PC and can resume

I'm a newbie and have a problem I just can't figure out. My system is:
a7n8x Deluxe
Primary IDE - Master 80GB HD
             Slave  40GB HD

I want to learn how to overclock. Is there a definitive source on the
web that can tell me how?

I just got an A8V Deluxe motherboard and been having a problem in
starting up the computer.
When I press the on/off button, the system does go through the check
of equipment, and then just sits there, there is no bios boot and no

I replaced my stock chipset fan (crapped out) with a Vantec Iceberg
(copper) today. I hope it is reliable because the fan did not come with
a yellow connector wire (just red and black), hence AsusProbe cannot
monitor rpms.

Just noticed a 1009 version bios on the Asus site.  The link for its
release info doesn't work.  Anyone know what changed in this version?
Thanks.