Okay, I was all ready to get the Asus P4P800E Deluxe motherboard and a
Pentium 4 2.8 Ghz 512k Cache 800 Mhz FSB 478 Northwood core processor
but Intel has stopped making them and has made sure no one will sell
them since they are better, less power hungry, and faster than the 33%

hey group,
Are the Labway PCI cards with Yamaha chip any good?  Are they XP compatable?

My P2-99 has had a celeron 500mhz CPU in it forever since I bought it
and worked fine, and according to ASUS's site it should be compatible
with a P3 700mhz cpu. However, I just tried to switch in that P3 700
cpu, and upon startup BIOS only detects it as a "PIII 466mhz"

Hi all, I just assembled a new system, however running into a big
problem.  There seems to be power to everything (all fans turn on, I
hear the hard drive turning on, fan on the video card is on), however
nothing is being displayed to the monitor.

I bought one PC with the following components 6 months ago:
Motherboard: A7N8X-E Deluxe
Micro: AMD Barton 2800 MHZ
Memory: 2x512 MB DDR (Generic)

Need to build wifey a new box, she does do graphics and patterns and
such...is this ATI Radeon 9100 IGP any good? Any and all info would be
greatly appreiated...oh, and difference between -VM and -V Deluxe
Thxs

can anyone think of any reason why my (Asus A7N266) mb won't work
properly with my new (Samsung PC3200 512Mb DDR400) RAM sticks?
it works fine with the old 256Mb elixir PC2100 stick but when I take
that out and put both PC3200 sticks in, it crashes my system when I

I have had problems with the computer shutting down.  I have a A7N8X-UAYZ MB
with fans everywhere, 512MB RAM, a 500 watt PSU, AMD 3000+ CPU that works
best at 1300 and an 8X AGP video card with its' own fan.
I've changed the BIOS to get it up to 2800 and it may come up.  When it

Does anyone know if they are making motherboard drivers for the K8V-SE
DELUXE,i can not find any drivers in this form.
Thanks for any info.

Recently upgraded to A8N-SLI Deluxe and updated bios to 1007 (beta)
I have 4x512MB PC3200 DDR RAM Non-Parity CL3 (Crucial)
The machine posts and runs fine but only recognises 1.5gb memory.
If I remove 1 stick it posts 1gb.

I had my A8N-SLI Deluxe running with (occasional freezes) a
Dual GPUs in SLI Mode
single MAXTOR 200GB SATA (Boot) connecting to NV-SATA1
single MAXTOR 200GB IDE

I have been using two 120 gb SATA on my P4C800 Deluxe for a couple of years.
I just swapped out my D drive for a 300 gb SATA drive.  Now every third or
forth time I boot I get the message "Reboot and select proper boot device or
insert media and press any key".  The drive is the ...

Can I get a pointer to the latest BIOS for the P2BF ? I found a 1.13
a the Asus site but I assume there is a 1.14beta somewhere like the
standard P2B ?
I plan to put a tatu 1.4g in the board and I would like to be up to

here's my rig:
MB: P4P800 latest BIOS
CPU: P4@2.8 HT
RAM: G.A.I.L 2x512MB, dual channel @ 400 MHz

Is it possible to boot from a USB jump drive on P5GDC-V mb?  if yes, how?
Thanks