Just built a new system which features the p4p800-vm mobo, the bios is 1013.
I have a maxtor Sata 250gb hd along with a samsung 160gb ide hd ,the Sata is
not being recognised at all in the bios, i have been told that the bios may
need updating, however the computer does not have a ...

Are there any Asus microATX boards w/a bios that will allow
a range of adjustments to an Athlon Mobile?
I've read that the Asus boards do not recognize an XP-M.
But do they allow for any range of adjustments to its FSB,

Hi people,
I've just changed heatsinks on my XP2500+@3200+ & MBM5 is giving me unusual
temps. The CPU Socket temp is about the same (which is a little
disappointing in itself) but the CPU Diode sensor is reporting temps about

I have a P4B533-E w XP, SP2, all  Bios settings for USB 2.0 enabled, all
updated USB XP drivers, and the device manager shows enhanced USB 2.0 ports
(6) in place with a USB 2.0 hub.
I cannot get my Sony DSC-W1 camera with a Sony large memory stick to see the

I'm running a P4T-E w/ P4 1.8Ghz, XP Pro, latest BIOS.  Lately, the system
will lock up and not restart.  When power is applied, everything powers up,
but the m/b doesn't post.  Sometimes it takes 2 days of powing on and off
before it restarts, but then the motherboard reports a ...

I've just ordered an Asus P4P800-VM Motherboard.
Not having owned an Asus motherboard before I felt it a good idea to
seek advice on things I may need to have solutions for before I start
the install.

Hi to everybody
I have a ASUS P2B-F rev. 1.00 PCB A28 and Voltage Regulator Chip HIP6019BCB
According to you can I upgrade my PIII Katmai 450 Mhz to a Celeron
Coppermine 1000 Mhz  (100 Mhz FSB) with my Slotket MSI MS-6905 Master?

Just put together a computer using the A7N8X-X mobo.Installed latest bios
(1010).Hooked up Floppy & HD.
Have partitioned HD (Seagate 120). Have not installed OS yet. Computer boots
up, but PS2 mouse is not functioning.  If I hook up a USB mouse, it works.

I have just purchased a ASUS A7V400-MX motherboard with a AMD XP3200+
CPU. The booklet states that the FSB clock can be set to 200MHz by
adjusting the switches on the motherboard. When I adjust the switches
to 200MHz and switch on the monitor stays in standby mode. The highest

Have just made the plunge into AMD 64 CPU and an ASUS A8N-SLI Dlx MB.  It
should be here in a couple days!  Currently my system is Intel with the
865PE chipset on an ASUS P4P800 Dlx.  Has anyone found a less than painful
method of changing the OS - XP Pro SP2 - from an intel MB ...

i would like to know if asus a7v support amd sempron cpu.

Having decided to build my own PC I have chosen  the P4P800 -E/Deluxe mobo,
along with a P4 E 3.0G  Intel proc and appropriate memory. However, in
looking  for a nice shiny new case in which to house all this expensive
gubbins, I noticed that the ATX input/output backplate (cut-outs ...

I'm trying to load Windows XP onto a Maxtor DiamondMax 10 SATA drive.
I have searched the forum and have found that I need to press F6 to
load the SATA drivers from floppy disk during the XP installation.  
My problem is that I cannot find the drivers....!

I've had 3 so-called 200-mhz FSB capable boards:
1) Gigabyte 7N400 Pro
2) AOpen AK79D-400 Max
3) Asus A7V880

I recently bought a USB only keyboard. I don't know if it was always
the case, but for some reason I got a USB 2.0 PCI card. In any event I
have a problem: I can't use the keyboard during boot unless I attach it
to the mainboard USB ports. Unfortunately if I do that the keyboard is