Anyone find DOS drivers or drivers that will work with Symantec Ghost for
this board yet? I spent hours today looking for some and the only ones
(Grayson) suggested by some as maybe compatible didn't do it.   I've got
several of these boards as when an ATX board on the network dies ...

Ok, I got a Diablo Tek Case with an ATX power supply, then got an ABit
NF-7S2 motherboard from Best Buy. I installed the motherboard
originally directly to the case, but some slight shorting problems and
a few minor alignment difficulties led me to putting the board on

I may have made a mistake in buying registered DDR PC3200.
Alan

I am experiencing problems with a new build using the above motherboard
and a Sempron 2600+.  Symptoms include BSOD and intermittents program
crashes, which seem to point towards potential memory problems (I seem
to have eliminated device driver problems as a possible cause).

Hello, folks:
I've been planning to put together another PC for a while now, and
I've gotten my hands on an old Abit KT7-RAID, some SDR, and an old
Athlon 1 GHz processor. I checked the VIA Web site, and have

After installing my out-of-the-box IC7-G Max II mobo with a P4 3.0E GHz CPU,
Intel stock fan and heatsink, Enermax 465W power supply, 256 Samsung PC2700
ddr RAM (PC3200 on it's way), Matrox Millenium G450 AGP...
It booted up normally and I entered the BIOS menu. I enabled keyboard ...

Does the kt7a raid mb support usb 2.0?
Thanks!

Just run MBProbe to check my settings as I have started to get an occasional
reeboot.
It happens after an audible alarm beeps High/Low twice then the computer
just shuts off.

I've had the AI7 running fine for about 4 weeks now.  3.4Ghz Prescott,
no overclocking, 1 Gig dual-channel RAM.  Last week I went out of town
for 6 days and shut the UPS completely off for the first time since
installing the AI7.  When I got back and turned everything back on, ...

Off off topic !  Humo(u)r... please, please don't flame me this time... I
cried myself silly for days last time I posted a computer maintenance
tutorial!
For those with drives that are running slow... consider "Docktor N?rton's

I've read several strings regarding this problem but none seems to
help!  The Sony DVD+/-RW reads and writes data just fine, but is jerky
when playing a CD/DVD.  There is an annoying 4Hz "beat".  I've tried
using different media player programs with the same result.  DMA is

Received a new Abit NF7-S2 Motherboard with a AMD Sempron 2600+ 1.83GHz
processor.
First problem is that the motherboard says the chip is an AMD Athlon XP 1100
MHz - is this correct or should it say Sempron. The motherboard has the

No issues here, but just kinda wondering :
If I use a BIOS Saviour, and I switch to the "alternate" BIOS for
whatever reason, do I need to reset/clear the BIOS ?  There's been a lot
of discussion here about the wisdom of clearing the BIOS, but I don't

want to upgrade my hard drive to the biggest i can get.
anyone know the largest size supported by the bios?

A big thanks to Gary Headlee at http://motherboardrepair.com  for another
job well done in resurrecting my BE6-II.  :^)
Quixote