I have a Compaq Proliant 88 with a single SCSI drive, running Novell 4.1.1
and the drive is out of free space. I purchased a new Maxtor 18 gig SCSI and
put it in the computer. The BIOS recognizes the drive when it is booting up,
and the Compaq utility correctly sees the drive, but ...

Need a reliable server?  These just keep going, and going....
  ... I use one as an "on line backup storage" on my LAN.  About ever month
or so, I fire it up, backup the data to it, and shut it down again.
  When the power is off:

I NEED YOUR HELP!IS THERE ANYBODY THAT CAN HELP ME TO CONFIGURE MY
COMPAQ Console Management Controller? THANKS!!

Lately my ProLiant 6000 has been giving a failed drive message. The
drive will fail, but if reseated it shows up healthy on a reboot and
prompts me for a rebuild. It will happily rebuild all green, then fail
after a couple of hours.

Someone was looking for a 486 CPU for a Proliant system?
  -- http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073167913
No, I'm not selling it. And yes -- in my opinion it is quite expensive.
Dan French

Ok, when I posted the Proliant 4500 for sale, I got 3 e-mail's, and several
postings.
When I confirmed what the system had, they all disappeared....
So, my questions:  Is there a particular part that people are looking for in

I have found some weeks ago a proliant 5000 with
dual PPRo200, 128M, 4 disk 2.1 gbytes and a duplexing kit.
I'd want to eliminate this kit and return to standard
scsi configuration, but removing the board installed

I have a proliant1600 with SCSI bay, 2 x 9.1Gb on positon 1 and 2 of  the
SCSI bay.
I replaced the second compaq 9.1Gb disk for a 36Gb SCSI IBM disk.
After that the next day the original 9.1Gb disk got its red led on the drive

After doing some searches in here, I have read that you can not set a
pci ata controller as the boot device on Proliant systems.  However, I
also came across the only system that supports ata hdd's is the DL320.
I happen to have one of these systems, a DL320 G2.  Unfortunately the

   I have two Prosignia 300 servers, one a Pentium 90 (bought in 1995)
and the other a Pentium 120 (bought in 1996). Both have been operating
perfectly since then, using Win NT.
   Differently than the Prosignia 200, the 300 doesn't have switches to

either that, or my news server hasnt been getting the messages...

LC

I picked up 2 Proliant servers last thursday (4/15/04) in 100% working
condition.  One with windows NT 4 server, the other with windows 2000
server.   no passwords or manuals, just a single cd package "Server Setup
and management."  I used the same CD for both machines and ran the ...

For a project we are looking at doing - does anyone know if or where  I can
get hold of a bulk order of  HP servers or workstations with the folllowing
spec;
A minimum of 4 32Bit PCI slots

First Email
Dear <blanked out>,
Your feedback is very important to us and on behalf of Hewlett-Packard we
apologize for the difficulties you are experiencing. Your message has been

i had a 1600R at a clients site, was experementing with it in hopes of
upgrading thier 1500T.
system had 1 p2300, extra ram card with ram, ( dont recall how much) and
a hard drive with NT on it setup and running.